Wooden Camera Unified Accessory Kit for Blackmagic Pocket Cinema Camera 6K (Pro, V-Mount)

Protect and add accessories to your Blackmagic Pocket Cinema Camera 6K Pro for pro-style video capture with this Cage from Wooden Camera. The cage protects your camera on three sides while maintaining access controls on all sides, and it leaves the camera's handgrip openly accessible. It features engraved focal plane markings to ensure accurate measurement.

Accessories can be mounted around the cage using the 1/4"-20 and 3/8"-16 threads that feature ARRI-style anti-twist locating holes. There is also a shoe mount on top and two 3/8"-16 mounting threads on the front of the cage to add optional rod mounts, microphones, lights, or other accessories. Pass-through slots on the side allow you to manage your cables. An HDMI right-angle adapter and HDMI/USB cable clamp are included to protect the camera's cable ports from cable pulls and snags.

Add a versatile mounting option to your Blackmagic Pocket Cinema Camera 6K Pro with the 15mm LWS Baseplate from Wooden Camera. The baseplate is made up of a baseplate core, an Arca-type dovetail camera mounting plate, and a lower quick dovetail. The versatile baseplate offers two types of quick release options with the upper and lower plate configuration.

The baseplate supports optional 15mm LWS rods at the correct lens height for the 6K Pro, and there are locking levers on front and back, allowing you to mount rods on the front and/or the back of the plate. The Arca-type plate offers a 3/8"-16 camera mounting screw, rubber padding to protect your camera from scratching or twisting, and a vertical 15mm rod port for incorporating the optional lens support or lens adapter. The lower quick dovetail provides 1/4"-20 and 3/8"-16 tripod mounting threads. Directional markings are engraved to ensure you can quickly mount the plates in the proper direction.

Add a lightweight top handle to your rig to add accessories, create low-angle shots, and safely carry your camera using this compact Top Handle with 3/8"-16 Mount from Wooden Camera. This simple, ergonomic top handle mounts onto your camera cage using a 3/8"-16 mounting thumbscrew that tightens from the top using a separately available screwdriver or Allen wrench.

The durable metal handle features numerous 1/4"-20 threads and 3/8"-16 mounting threads on the top, front, and back. Each thread features ARRI-style anti-twist locating holes to add articulating arms, mounts, and accessories.

The 12" Safety Dovetail Plate from Wooden Camera is an ARRI standard dovetail with a stopper screw on one end and a safety latch on the other to prevent accidental camera detachment. It features threaded 1/4-20 and 3/8-16 holes for accessory mounting and tripod attachment. The dovetail can be attached to a shoulder pad for custom handheld configurations.

Add a professional, high-capacity battery plate to power your Blackmagic Pocket Cinema Camera 6K Pro rig with this compact Micro Battery Slide Pro from Wooden Camera. It supports one V-mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using a 2-pin LEMO-type connector cable. With the camera's L-series battery in place, hot swapping is supported.

The battery slide mounts onto optional 15mm rods using its integrated 15mm LWS rod clamp. It also features two 5.8V D-Tap outputs for powering accessories. Each D-Tap accessory output features a digital fuse that monitors the D-Tap port and disables it if it exceeds the set current for accessories, leaving the camera running without interruption. Once the load has been reduced by removing accessories, a reset button can be pressed to enable accessory power again.

This is a single, 15" long 15mm Support Rod from Wooden Camera for mounting accessories. It is chamfered at each end to ease sliding accessories on and off, and has a hollow interior providing for maximum strength.