Ubiquiti Networks LTU-PRO-US Overview
-
1Description
-
2Reliable Connectivity
-
3LTU Technology
-
4Independent TX & RX Configurations
-
5Signal Control
-
6Auto Power Adjustments
-
7Pole Mount
-
8Additional Features
Featuring a powerful internal antenna, the LTU Pro 5 GHz PtMP Subscriber Station & Client Radio from Ubiquiti Networks is a Customer Premises Equipment (CPE) device that's built to work in a Point-to-MultiPoint (PtMP) environment with the LTU Rocket as the BaseStation. It uses Ubiquiti's proprietary LTU technology to provide fast and reliable 802.11 Wi-Fi connections that can transfer over 600 Mb/s over the 5 GHz signal band. The LTU Pro supports both bridged and built-in NAT router modes to suit your deployment. You can also individually configure the TX and RX frequencies to avoid local interference. Made from UV stabilized plastic, the LTU Pro may be installed outdoors using the included pole mount, connecting to the client's switch or router through its Gigabit Ethernet port with the included PoE injector placed in between to provide power.
Reliable Connectivity
The LTU Pro PtMP CPE features a powerful internal 24 dBi antenna that delivers reliable 802.11 Wi-Fi connections to LTU Rocket BaseStations.
LTU Technology
Ubiquiti's LTU technology is designed to overcome the limitations of the 802.11 Wi-Fi standard by using a custom processor and radio architecture to deliver over 600 Mb/s throughput and modulation rates of up to 4096 QAM.
Independent TX & RX Configurations
The TX and RX channels may be individually configured to the 10, 20, 30, 40, and 50 MHz frequencies to avoid interference.
Signal Control
The LTU Pro's target TX output power controls each station's TX output power. A PtMP network can manage signal levels to enhance network stability and wireless performance with the highest possible modulation.
Auto Power Adjustments
The Auto Output Power option allows the LTU Pro to set the output power (EIRP) to the appropriate level.
Pole Mount
Quickly and reliably install your LTU Pro onto a pole with the included mounting kit. With its built-in mechanical tilt, you can adjust the mounting brackets with a range of ± 15° to optimize the signal quality.
Additional Features
Beamwidth: 14°
Sidelobe Level: -10 dB
Front-to-Back Ratio: 27 dB
Wind Loading: 33.72 lbf @ 125 mph
Wind Survivability: 125 mph
ESD/EMP Protection: ±24kV Contact/Air
![]()
UPC: 817882029230
In the Box
- Ubiquiti Networks LTU Pro 5 GHz PtMP Subscriber Station & Client Radio
- Mount Bracket
- Front Bracket Clamp
- Rear Bracket Clamp
- 2 x Carriage Bolts
- 2 x Flange Nuts
- Gigabit PoE Injector (24 V, 0.5 A) with Mounting Bracket
- Power Cable
- Limited 1-Year Warranty
Table of Contents
- Description
- Reliable Connectivity
- LTU Technology
- Independent TX & RX Configurations
- Signal Control
- Auto Power Adjustments
- Pole Mount
- Additional Features
Ubiquiti Networks LTU-PRO-US Specs
Wireless
| Wireless Frequency Bands |
5 GHz Single-Band |
| Number of Antennas |
1 |
| MU-MIMO Support |
None |
| Antenna Gain |
24 dBi |
| Transmit Power |
22 dBm |
| Antenna Placement |
Internal |
Interface
| Ports |
1 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) PoE |
Electrical
| DC Input Power |
24 VDC at 0.5 A |
| Power Consumption |
9 W |
Environmental
| Operating Temperature |
-40 to 140°F / -40 to 60°C |
| Operating Humidity |
10 to 90% |
General
| Mount Options |
Pole |
| Dimensions |
12.5 x 12.5 x 6.9" / 316.5 x 316.5 x 174.3 mm |
| Weight |
2.9 lb / 1.3 kg |
Packaging Info
| Package Weight |
5.8 lb |
| Box Dimensions (LxWxH) |
11.3 x 4.8 x 4.5" |
Ubiquiti Networks LTU-PRO-US Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
