TV One MG-AOC-66A Overview
Run your HDMI signal over 32.8' in high-traffic areas with the TV One Magenta MG-AOC-66A-10 Active Optical High-Speed HDMI Cable. It features an armored, crush-resistant design that is engineered to withstand up to 15,000 lb for safe use in live event installations. It's also protected from water damage with its watertight end caps. The cable supports resolutions up to DCI 4K at 60 Hz with 4:4:4 color along with EDID and HDCP 2.2 to allow the pass-through of copyright-protected content in multiple-display configurations. This directional cable doesn't require an external power source, simplifying your installation.
- Rugged armored core makes this cable crush resistant up to 15,000 lb, making it well suited for use in live event installations
- Watertight end caps
- Supports 480i to 4K60 4:4:4 with no compression, latency, or signal loss
- No external power required
- Supports bi-directional EDID and HDCP communication
- 4-channel 850nm VCSEL array O/E converter for transmitter; 4-channel GaAs PD array O/E converter for receiver
- OM3 fiber and copper wire hybrid cable
- 33.1 lb maximum tensile load
- 0.79" minimum bend radius
- 100 ohm typical differential input
- 250mW maximum power consumption
- Directional design
In the Box
- TV One Magenta MG-AOC-66A-10 Active Optical High-Speed HDMI Cable (32.8')
- Limited 1-Year Warranty
TV One MG-AOC-66A Specs
General
Connector 1 |
1 x HDMI Male |
Connector 2 |
1 x HDMI Male |
Cable Length |
32.8' / 10 m |
HDMI Version |
2.0 |
HDCP Support |
Version 2.2 |
Outer Diameter |
0.2" / 4.5 mm |
Electrical
Maximum Resolution Support |
4096 x 2160 at 60 Hz |
Bandwidth |
18 Gbps |
Compliance |
EDID, HDCP |
Environmental
Warranty Length |
Limited 1-Year Warranty |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.