Tripp Lite PDUMH30ATNET Overview
-
1Description
-
2Automatic Transfer Switching
-
3USB & Ethernet Inputs
-
4Power Configurations
Distribute power to your network devices and maintain your system with the 2.9kW Single-Phase Automatic Transfer Switch PDU. Ideal for businesses looking to simplify their network power capabilities, this PDU offers 24 5-20R switched outlets and a single L5-30R receptacle, giving you ample connections for your single-corded devices.
Dual single-phase 30A 120V circuits can produce up to 2.9kW output with a maximum 20-amp capacity and 50/60 Hz frequency compatibility, so this PDU can balance and evenly distribute power to your connected networking devices. Two attached L5-30P power cables support primary and secondary sources for efficient power management. Front panel LCD digital display and power indicators provide real-time details on amperage, outlet power, ground connection, and load. You can install the PDU in various tower racks with 2 RU of available space. Additionally, this unit is TAA compliant, for installation and use within government facilities.
Automatic Transfer Switching
An onboard Automatic Transfer Switch (ATS) processor allows the system to transfer power to secondary input when primary input is lost. When power is restored, the system transfers power back to primary. Additional parameters maintain power quality on both inputs to prevent transfer to secondary source when power is lower quality than the primary source.
USB Type-A and micro-USB ports grants you configuration and console access when needed with Envirosense2 control modules. The PDU can also connect to your network where you can manage your system through various interfaces including Java-free HTML5, telnet, SSH, and SNMP. A pre-installed WEBCARDLX features PowerAlert Device Manager firmware for remote management capabilities.
This PDU supports configurations with network enabled UPS protection units, allowing you to use an optional battery backup in the event of a power failure. Both power cables from the PDU can connect to the same or different UPS devices. Additionally, you can connect this device to backup generators and separate out of phase utility power grid feeds.
In the Box
- Tripp Lite 2.9kW Single-Phase Automatic Transfer Switch PDU
- 2 RU Mounting Brackets
Table of Contents
- Description
- Automatic Transfer Switching
- USB & Ethernet Inputs
- Power Configurations
Tripp Lite PDUMH30ATNET Specs
| Form Factor |
Rackmount |
| Type |
Distributor |
| Rated Current |
24 A |
| Number of Circuits |
2 |
| Metering |
None |
| Battery Backup |
No |
| Typical Backup Runtime |
Not Specified by Manufacturer |
| Integrated Lamps |
None |
Connections
| Outlets |
24 x NEMA 5-20R
1 x NEMA L5-30R |
| Wall Plug Type |
2 x NEMA L5-30P |
| USB Ports |
1 x USB Type-A
1 x Micro-USB |
| Ethernet |
1 |
| Coaxial |
None |
| RJ11 |
None |
| Remote |
None |
| Lamp Connectors |
None |
Electrical
| AC Input Power |
120 VAC, 50 / 60 Hz (30 A) |
| Output Voltage |
120 VAC |
| DC Output Power |
Not Specified by Manufacturer |
| Output Current |
24 A |
| Load Capacity |
2880 W |
| Sequencing Delay |
None |
Protection & Conditioning
Environmental
| Certifications |
CSA, NOM, RoHS, TAA, UL
*as per Manufacturer |
| Operating Temperature |
32 to 104°F / 0 to 40°C |
| Operating Humidity |
5 to 95% |
| Storage Temperature |
-22 to 122°F / -30 to 50°C |
| Storage Humidity |
5 to 95% |
Physical
| Rackmount Size |
2 RU |
| Cable Length |
10' / 3 m |
| Dimensions |
17.3 x 11.9 x 3.4" / 43.9 x 30.2 x 8.6 cm |
| Weight |
15.3 lb / 6.94 kg |
Packaging Info
| Package Weight |
19.67 lb |
| Box Dimensions (LxWxH) |
20.1 x 17.2 x 7.8" |
Tripp Lite PDUMH30ATNET Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
