Tiltaing Pro Camera Kit for Sony a1 (Black)

Protect and add accessories to your Sony a1 mirrorless camera with this lightweight black Full Camera Cage from Tilta. The durable aluminum and stainless steel cage maintains access to the camera's controls and weighs only 6.5 oz.

Use this cage to mount a variety of accessories using the integrated mounts, including the top shoe mount, top NATO rail, right-side NATO rail, right-side ARRI-style rosette, and multiple left-side 1/4"-20 mounting threads. The cage also features multiple 1/4"-20 threads on the bottom to mount it on the included Manfrotto-type quick release plate, a tripod, or other rig.

This Tilta Quick Release Top Handle, in black, is a durable, sculpted top handle that attaches securely to a cold shoe and provides accessory mounting points, in addition to a top handle grip for your camera. The quick release handle's features include two cold shoe mounts, one in the front with a spring-loaded safety latch and the second on the back. The handle also features a 15mm rod port and multiple 1/4"-20 and 3/8"-16 threads with and without anti-twist divots.

The aluminum and stainless steel handle attaches to your camera or cage using the included spring-loaded thumbscrew. The 15mm rod port features a locking lever to secure the rod in place. On the front face of the handle, there is a 1/4"-20 threaded mounting hole with anti-twist divots. Multiple 1/4"-20 and 3/8"-16 threaded mounting holes are machined into the top and sides of the handle.

This black Tiltaing 15mm LWS Baseplate Type II from Tilta features two mounting surfaces. The top of the baseplate allows for mounting of Tiltaing half and full camera cages for Panasonic GH5 series, Fuji XT3/4, Nikon Z6/Z7, and Sony a6/a7/a9 cameras. The bottom of the baseplate mounts on Tilta standard dovetails. The bottom also incorporates three 1/4"-20 threaded holes for mounting the baseplate directly on a tripod. Built into the baseplate is a pair of LWS 15mm rod clamps with spring-loaded locking levers.

Designed for Tiltaing camera cages, the Left-Side Advanced Focus Handle, in black, allows you to connect to the optional Nucleus Nano motor to control focus via a built-in finger wheel. It also features a record button for triggering record on/off over an optional Tilta R/S cable connection to compatible cameras. Multiple R/S cables are available, depending on your camera.

The handle attaches to the left side of your Tiltaing cage using your choice of an optional dedicated Left Side Handle Adapter�the Type IV, V, or VI version. Each of these attachment adapters use a different mount type, such as rosette or NATA rail.

The handle accepts a Sony F570 battery, sold separately. An included USB cable connects the handle to your Nucleus Nano motor to power it off the F570 battery and to allow finger-wheel focus control.

There are two connections on the handle: an 8V regulated USB Type-C output (where the USB cable plugs in) and 12 VDC output.

The Advanced Left-Side Handle Adapter Type VI from Tilta enables you to mount a Tiltaing Left-Side Wooden Handle to the NATO rail mount on select Tilting camera cages. This black Type VI adapter is constructed of aluminum and stainless steel and comes with an Allen key.

Compatibility

NATO Rail Mount

The Tiltaing Run/Stop Cable from Tilta connects the Tiltaing Advanced Side Handle to your Sony a6, a7, or a9 series camera, enabling run/stop triggering with the push of a button.

Prevent the HDMI cable from accidentally disconnecting when plugged into your Sony a1 camera with this black HDMI Cable Clamp Attachment from Tilta. This cable clamp is designed to mount onto the Tilta Full Cage for the Sony a1 using two screws, and the cable is tightened using the captive thumbscrew. It is constructed with durable aluminum and stainless steel, and it comes with an Allen wrench to tighten the screw securely.

This HDMI Extension Cable from Tilta is primarily designed to connect to your camera inside your Tiltaing cage, providing you with an ergonomic method of wiring your camera to an external HDMI monitor. Simply plug the male HDMI end into the camera, and connect your display's HDMI cable to the female port of this extension cable. It is also compatible with Tilta's HDMI cable clamps for security.

Tilta's 8" Threaded 15mm Rods are a pair of 8" rods with female threading on both ends. This allows you to use optional threaded rod adapters to extend the length. As a standard practice, Tilta chamfers one end of their rods and leaves the other end with a straight cut. The chamfering makes it easier to slide accessories onto the rods, while the end with the straight cut makes for a smoother rod join.

The rods are made from machined aluminum for a balance between weight and strength, and then anodized black for wear and corrosion resistance. Please note that there is no industry-wide standard for support rod threading, so when sourcing optional rod extenders, it is best to stay within one brand.