Tilta HDA-T02 Overview
Fast to set up with eight mounting modes to attach it to your car, the Hydra Alien Car Mounting System Pro Kit from Tilta is a flexible shock-absorbing system for your camera on the DJI RS2 system. Featuring a V-mount battery plate for power, you can mount the Hydra Alien at virtually any angle as its suction cup supports up to 110 lb, creating a strong seal. The shock-absorbing silicone rubber cup helps protect the surface of your vehicle.
The included remote kit provides you full control over the RS2, including start/stop, either wirelessly or by wire from inside the car, and the included monitor bracket simplifies your monitoring situation. This system supports any gimbal that can mount via 1/4"-20 screws and power via D-Tap. The Remote Control Handle only supports the RS2. The system packs neatly into the included transport case.
Note:
CAUTION: Tilta does not recommend using the suction cups on wrapped vehicles due to suction issues related to direct sunlight and heat.
The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography.
- Quick assembly
- Durable and lightweight
- Folding dovetail plate
- Run/stop functionality
- Flexible assembly
The Pro Kit features the Remote Control Kit that offers full wired or wireless control of the DJI RS 2 and includes the Hydra Alien Monitor Bracket, making it easier to monitor your footage while controlling the RS 2. It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.
Custom-made power supply baseplate and side holding bracket for RS 2 provide additional protection for your camera during high-speed driving and bumpy shooting conditions.
Various and flexible mounting options. Supports high and low shooting angles. Compatible with a wide range of car types and complex mounting surfaces.
The system also uses a shock-absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down.
The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal.
In the Box
- Tilta Hydra Alien Car Mounting System Pro Kit (V-Mount)
- Hydra Alien Dovetail Plate L1
- Hydra Alien Dovetail Plate L2
- Hydra Alien Dovetail Plate L3
- Hydra Alien Dovetail Plate L4
- Hydra Alien Dovetail Connector Plate
- Hydra Alien Large Suction Cup
- 2 x Hydra Alien Small Suction Cup
- Hydra Alien Shock-Absorbing Arm with Hydraulic Damping Pole
- Tilta Power Supply Base Plate for Select DJI Gimbals
- 8 x Counterweight (7.7 oz)
- Hydra Alien Cable Clamp Suction Cup Set
- Hydra Alien Tool Kit
- Safety Belt
- Hydra Dual Battery Plate Cradle Head
- Hydra Alien V-Mount Battery Plate
- Hydra Alien 90-Degree Adapter for Shock-Absorbing Head
- Hydra Alien Shock-Absorbing Head
- Hydra Alien Dual Battery Plate Support Bracket
- Hydra Alien Monitor Bracket
- Remote Control Handle for RS 2/Ronin S
- Remote Control Receiver Module for RS 2
- 6-Pin to 6-Pin LEMO Cable
- Hydra Alien Car Mounting Hard-Shell Waterproof Safety Case
Tilta HDA-T02 Specs
General
| Compatibility |
DJI Ronin RS 2 |
Power
| Power Source |
Battery (Not Included) |
| Battery Type |
1 x V-Mount |
Physical
| Mounting |
Multiple x Suction Cups |
| Material of Construction |
Aluminum |
| Cable Length |
Not Specified by Manufacturer |
| Dimensions |
2.7 x 1.1 x 0.6' / 83 x 33 x 17 cm |
| Weight |
14.3 lb / 6.5 kg |
Packaging Info
| Package Weight |
41.5 lb |
| Box Dimensions (LxWxH) |
38.25 x 17 x 7" |
Tilta HDA-T02 Reviews
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
