Texas Instruments TXB0104YZTR Voltage Level Translator 1.2 V to 5.5 DSBGA-12

The TXB0104YZTR is a 4-bit bidirectional Voltage-level Shifter with auto direction sensing and ±15kV ESD protect. The non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. This allows for universal low-voltage bidirectional translation between any of the 1.2/1.5/1.8/2.5/3.3/5V voltage nodes. VCCA should not exceed VCCB. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor and the minimum value of the resistor is determined by the current-sourcing capability of the driver. This device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

• VCC Isolation - If either VCC input is at GND, all outputs are in the high-impedance state
• OE Input circuit referenced to VCCA
• IOFF Supports partial-power-down mode operation
• Latch-up performance exceeds 100mA per JESD 78, class II
• Green product and no Sb/Br

Applications

Industrial, Automation & Process Control, Signal Processing, Sensing & Instrumentation, Wireless, Multimedia, Aerospace, Defence, Military, Consumer Electronics, Communications & Networking

Other details

Brand	TEXAS INSTRUMENTS
Part Number	TXB0104YZTR
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.