Texas Instruments TS3A27518EPWR Analog Multiplexer / Demultiplexer 1:2 6 Circuits 6.2 ohm 1.65V to 3.6V TSSOP-24

The TS3A27518EPWR is a 1:2 Multiplexer/Demultiplexer that can handle both digital and analog signals and can transmit signals up to VCC in either direction. The device has two control pins, each controlling three 1:2 muxes at the same time and an enable pin that put all outputs in high impedance mode. The control pins are compatible with 1.8V logic thresholds and are backward compatible with 2.5V and 3.3V logic thresholds. The device allows any SD, SDIO and multimedia card host controllers to expand out to multiple cards or peripherals because the SDIO interface consists of 6-bit, CMD, CLK and data [0:3] signals. The device has two control pins that give additional flexibility to the user. For example, the ability to mux two different audio-video signals in equipment such as an LCD television, an LCD monitor or a notebook docking station.

• Isolation in power-down mode, VCC = 0
• Low-capacitance switches, 21.5pF (typical)
• Bandwidth up to 240MHz for high-speed rail-to-rail signal handling
• Crosstalk and OFF isolation of -62dB
• 1.8V Logic threshold compatibility for control inputs
• 3.6V Tolerant control inputs
• Latch-up performance exceeds 100mA Per JESD 78, Class II
• ESD performance tested per JESD 22

Applications

Signal Processing, Communications & Networking, Imaging, Video & Vision, Audio

Other details

Brand	TEXAS INSTRUMENTS
Part Number	TS3A27518EPWR
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.