Texas Instruments TPS70950DBVT TPS70950DBVT Fixed LDO Voltage Regulator 2.7V to 30V 690mV Dropout 5Vout 150mAout SOT-23-5

The TPS70950DBVT is an Ultralow IQ Wide Input Low-dropout Regulator with reverse current protection designed for power-sensitive applications. A precision band-gap and error amplifier provides 2% accuracy over-temperature. Quiescent current of only 1µA make this device ideal solutions for battery-powered, always-on systems that require very little idle-state power dissipation. This device has thermal-shutdown, current-limit and reverse-current protections for added safety. This regulator can be put into shutdown mode by pulling the EN pin low. The shutdown current in this mode goes down to 150nA, typical. The TPS709 internal current limit helps protect the regulator during fault conditions. During current limit, the output sources a fixed amount of current that is largely independent of output voltage. It uses a PMOS pass transistor to achieve low dropout voltage.

• Ultralow IQ (1µA)
• Reverse current protection
• Low ISHUTDOWN (150nA)
• Supports 200mA peak output
• 2% Accuracy over-temperature
• Available in fixed-output voltages (1.2 to 6.5V)
• Thermal shutdown and over-current protection
• Green product and no Sb/Br

Applications

Building Automation, Metering, Test & Measurement, Portable Devices, Wireless, Communications & Networking

Other details

Brand	TEXAS INSTRUMENTS
Part Number	TPS70950DBVT
Quantity	Each (Supplied on Cut Tape)
Product Change Notice EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.