Texas Instruments TPS2042BDR TPS2042BDR Power Load Switch High Side Active Low 2 Outputs 0.07 ohm On State 5.5 V Supp 1 A SOIC-8

The TPS2042BDR is a Power Distribution Switch intended for applications where heavy capacitive loads and short circuits are likely to be encountered. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7V. When the output load exceeds the current-limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When continuous heavy overloads and short-circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently.

• 70mR High-side MOSFET
• 500mA Continuous current
• Thermal and short-circuit protection
• 0.6ms Typical rise time
• Undervoltage lockout
• Deglitched fault report (OC)
• No OC glitch during power up

Applications

Power Management, Motor Drive & Control

Other details

Brand	TEXAS INSTRUMENTS
Part Number	TPS2042BDR
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.