Texas Instruments TCA9509DGKR TCA9509DGKR Specialized Interface I2C Smbus Bus & Systems Applications 900 mV 5.5 V Vssop

The TCA9509DGKR is an I²C bus/SMBus Repeater for use in I²C/SMBus systems. It can also provide bidirectional voltage-level translation (up-translation/down-translation) between low voltages (down to 0.9V) and higher voltages (2.7 to 5.5V) in mixed-mode applications. This device enables I²C and similar bus systems to be extended, without degradation of performance even during level shifting. The TCA9509 buffers both the serial data (SDA) and the serial clock (SCL) signals on the I²C bus, thus allowing 400pF bus capacitance on the B-side. This device can also be used to isolate two halves of a bus for voltage and capacitance. The TCA9509 has two types of drivers, A-side drivers and B-side drivers. All inputs and B-side I/O's are over-voltage tolerant to 5.5V. The A-side I/O's are over-voltage tolerant to 5.5V when the device is unpowered (VCCB and/or VCCA=0V).

• Two-channel bidirectional buffer
• Active-high repeater-enable input
• Requires no external pull-up resistors on lower-voltage port-A
• Open-drain I²C I/O
• 5.5V Tolerant I²C and enable input support mixed-mode signal operation
• Lock-up free operation
• Accommodates standard-mode and fast-mode I²C devices and multiple masters
• Supports arbitration and clock stretching across repeater
• Powered-OFF high-impedance I²C-bus pins
• Green product and no Sb/Br

Applications

Industrial, Communications & Networking

Other details

Brand	TEXAS INSTRUMENTS
Part Number	TCA9509DGKR
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.