Texas Instruments SN74LVC244ADBR Buffer / Line Driver 74LVC244 1.65 V to 3.6 SSOP-20

The SN74LVC244ADBR is an octal Buffer/Driver with 3-state outputs and designed for 1.65 to 3.6V VCC operation. This device is also designed for asynchronous communication between data buses. This device is organized as two 4-bit buffers/line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver.

• IOFF Supports live insertion, partial-power-down mode and back-drive protection
• Allows down voltage translation
• Supports mixed-mode signal operation on all ports
• Inputs accept voltages to 5.5V
• Latch-up performance exceeds 250mA per JESD 17
• 5.9ns at 3.3V Propagation delay (tpd)
• <0.8V at VCC = 3.3V, TA = 25?C VOLP (output ground bounce)
• >2V at VCC = 3.3V, TA = 25?C VOHV (output VOH undershoot)
• Green product and no Sb/Br

Applications

Industrial, Consumer Electronics, Wireless, Imaging, Video & Vision, Signal Processing, Motor Drive & Control

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN74LVC244ADBR
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.