Texas Instruments SN74HC374N Flip-Flop 74HC374 D 19 ns 70 MHz 7.8 mA DIP

The SN74HC374N is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. The eight flip-flops of the \x92HC374 devices are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels that were set up at the data (D) inputs. An output-enable (OE) input places the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components.

• High-current 3-state true outputs can drive up to 15 LSTTL loads
• Full parallel access for loading
• 80?A Maximum low power consumption
• 14ns Typical tpd
• ?6mA Output drive at 5V
• 1?A Maximum low input current
• ?35mA Continuous output current
• ?70mA Continuous current through VCC or GND

Applications

Industrial

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN74HC374N
Quantity	Each

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.