Texas Instruments SN74AVC2T45DCUT Transceiver 74AVC2T245 1.2 V to 3.6 VSSOP-8

The SN74AVC2T45DCUT is a dual-bit dual supply Bus Transceiver with configurable voltage translation and 3-state outputs. This 2-bit non-inverting bus transceiver uses two separate configurable power-supply rails. The A ports are designed to track VCCA and accepts any supply voltage from 1.2 to 3.6V. The B ports are designed to track VCCB and accept any supply voltage from 1.2 to 3.6V. This allows for universal low-voltage bidirectional translation and level-shifting between any of the 1.2/1.5/1.8/2.5/3.3V voltage nodes. The logic levels of the direction-control input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess leakage current on the internal CMOS structure.

• Designed for asynchronous communication between two data buses
• VCC Isolation
• Partial-power-down mode operation
• Latch-up performance exceeds 100mA per JESD 78, class II
• ESD protection exceeds JESD 22
• Green product and no Sb/Br

Applications

Industrial, Automation & Process Control, Signal Processing, Consumer Electronics, Communications & Networking, Computers & Computer Peripherals, Portable Devices

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN74AVC2T45DCUT
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.