Texas Instruments SN74ABT574ADW Flip-Flop 74ABT574 D 3.9 ns 200 MHz 64 mA Soic

The SN74ABT574ADW is an octal edge-triggered D-type Flip-flop with 3-state outputs. It is designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. On the positive transition of the clock input, the Q outputs are set to the logic levels set up at the data (D) inputs. A buffered OE\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pull-up components. OE\ does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

• Ioff Supports partial-power-down mode operation
• Latch-up performance exceeds 500mA per JEDEC Standard JESD 17
• Green product and no Sb/Br

Applications

Communications & Networking, Industrial

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN74ABT574ADW
Quantity	Each

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.