Texas Instruments SN65LVDS390PW High Speed Differential Line Receiver IC Lvds 630 Mbps 4 Receivers 3 V to 3.6 TSSOP-16

The SN65LVDS390PW is a quad differential Line Receiver implements the electrical characteristics of low-voltage differential signalling (LVDS). This signalling technique lowers the output voltage levels of 5V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds and allow operation with a 3V supply rail. Any of the differential receivers provides a valid logical output state with a ±100mV differential input voltage within the input common-mode voltage range. The input common-mode voltage range allows 1V of ground potential difference between two LVDS nodes. Additionally, the high-speed switching of LVDS signals almost always requires the use of a line impedance matching resistor at the receiving end of the cable or transmission media. The LVDT products eliminate this external resistor by integrating it with the receiver.

• Open-circuit failsafe
• Flow-through pin-out
• Integrated 110R line termination resistors on LVDT products
• Bus-terminal ESD exceeds 15kV
• 2.6ns Typical propagation delay time
• 100ps Typical output skew
• <1ns Part-to-part skew
• 630Mbps Signalling rate
• Green product and no Sb/Br

Applications

Wireless, Communications & Networking, Computers & Computer Peripherals

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN65LVDS390PW
Quantity	Each

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.