Texas Instruments SN65LVDS389DBT SN65LVDS389DBT IC Lvds Line Driver Octal

The SN65LVDS389DBT is an octal differential Line Driver implements the electrical characteristics of low-voltage differential signaling (LVDS). This signaling technique lowers the output voltage levels of 5V differential standard levels (such as EIA/TIA-422B) to reduce the power, increase the switching speeds and allow operation with a 3.3V supply rail. Any of the 16 current-mode drivers will deliver a minimum differential output voltage magnitude of 247mV into a 100R load when enabled. When disabled, the driver outputs are high-impedance. Each driver input (A) and enable (EN) have an internal pull-down that will drive the input to a low level when open-circuited.

• Very low radiation (EMI)
• Low-voltage differential signaling with typical output voltage of 350mV and a 100R load
• Driver is high-impedance when disabled or with VCC <1.5V
• Bus-pin ESD protection exceeds 15kV
• 630Mbps Signalling rate
• <2.9ns Propagation delay time
• <150ps Output skew
• <1.5ns Part-to-part skew
• 35mW at 200MHz Total power dissipation in each driver
• Green product and no Sb/Br

Applications

Wireless, Communications & Networking, Computers & Computer Peripherals

Other details

Brand	TEXAS INSTRUMENTS
Part Number	SN65LVDS389DBT
Quantity	Each

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.