The SN65LVDM050D is a differential Line Driver and Receiver uses low-voltage differential signaling (LVDS) to achieve high signaling rates. This circuit is similar to TIA/EIA-644 standard compliant devices (SN65LVDS) counterparts, except that the output current of the drivers is doubled. This modification provides a minimum differential output voltage magnitude of 247mV across a 50R load simulating two transmission lines in parallel. This allows having data buses with more than one driver or with two line termination resistors. The receiver detects a voltage difference of 50mV with up to 1V of ground potential difference between a transmitter and receiver. The intended application of this device and signaling technique is point-to-point half duplex, baseband data transmission over a controlled impedance media of approximately 100R characteristic impedance. The transmission media may be printed-circuit board traces, backplanes or cables.
- Typical full-duplex signalling rate of 100Mbps
- Bus-terminal ESD exceeds 12kV
- Low-voltage differential signaling with typical output voltage of 340mV with a 50R load
- Valid output with as little as 50mV input voltage difference
- Propagation delay time - 1.7ns Typical driver and 3.7ns typical receiver
- Power dissipation at 200MHz - 50mW Typical driver and 60mW typical receiver
- LVTTL input levels are 5V tolerant
- Driver is high-impedance when disabled or with VCC <1.5V
- Receiver has open-circuit failsafe design
- Green product and no Sb/Br
Applications
Signal Processing, Industrial
Product details
| Driver Case Style |
SOIC |
| No. of Pins |
16Pins |
| Operating Temperature Min |
-40°C |
| Operating Temperature Max |
85°C |
| Product Range |
- |
| MSL |
MSL 1 - Unlimited |
Other details
| Brand |
TEXAS INSTRUMENTS |
| Part Number |
SN65LVDM050D |
| Quantity |
Each |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
