Texas Instruments ADC101C021CIMK/NOPB Analogue to Digital Converter 10 bit 188.9 Ksps Single Ended 2 Wire I2C Serial 2.7 V

The ADC101C021CIMK/NOPB is a 10-bit successive-approximation Analogue-to-digital Converter operates from a +2.7 to 5.5V supply. The low-power monolithic converter is based on successive approximation register architecture with an internal track-and-hold circuit that can handle input frequencies up to 11MHz. The ADC101C021 operates from a single supply which also serves as the reference. The device features an I²C-compatible serial interface that operates in all three speed modes, including high speed mode 3.4MHz. The ADC's Alert feature provides an interrupt that is activated when the analogue input violates a programmable upper or lower limit value. The device features an automatic conversion mode, which frees up the controller and I²C interface. In this mode, the ADC continuously monitors the analogue input for an "out-of-range" condition and provides an interrupt if the measured voltage goes out-of-range.

• Out-of-range alert function
• Automatic power-down mode while not converting
• 1µs Typical conversion time
• 188.9kSPS Maximum throughput rate
• Green product and no Sb/Br

Applications

Portable Devices, Medical, Test & Measurement

Warnings This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Other details

Brand	TEXAS INSTRUMENTS
Part Number	ADC101C021CIMK/NOPB
Quantity	Each (Supplied on Cut Tape)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.