The Telemetrics Power Supply for Canon XU-80 is a fully enclosed stand-alone unit that is designed to provide power to Canon XU-80.
Powered from 90 to 264VAC through the universal IEC320/C14 power inlet, this power supply accepts virtually any voltage. The power supply uses an individual AC power cord.
A flexible DC power cord is permanently attached to the unit, which makes it suitable for local power applications.
- Accepts voltages from 90-264V
- Compact enclosure
- Output Short Circuit, Overload, and Overvoltage Protection
In the Box
Telemetrics Power Supply for Canon XU-80
- AC Power Cord
- Limited 1-Year Warranty
| Input |
| Voltage | 90 - 264 VAC |
| Frequency | 47 - 63 Hz |
| Current | 2.0 A max |
| Inrush Current | 100 A max at 230 VAC |
| Power Factor | Compliant with EN61000-3-2 |
| Connector | IEC320/C14* |
| Output |
| Voltage | 12 VDC |
| Current | 8.33 A max |
| Regulation | ± 4% |
| Total Power | 100 W max |
| Noise and Ripple | 1% pk - pk max |
| Protection | Short Ckt, Overload |
| Hold-Up Time | 20 mS at 115 VAC |
| Cable Length | 48" (1220 mm) |
| General |
| Size | 5.9 x 2.8 x 1.4" (150 x 70 x 35 mm) |
| Operating Temprature | 32 - 149° F (0 to +65° C) |
| Efficiency | 85 % typical |
| Approvals | UL60950-1, CAN/CSA C22.2 No 60950 cUL |
| EMC | EN55022 Level B |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
