Product Overview
SRTD-2 is a SRTD series polyimide insulated surface mount RTD temperature sensor designed to provide a practical method for measuring surface temperatures. This sensor is small and flexible, and its low mass has minimal thermal effect on the material being measured. This is ideally suited for applications where the sensor can be mounted to the surface being measured using adhesives (OMEGABOND™ 101 and 200 epoxies can be used) or other mechanical mounting methods.
- Ideal for surface temperature measurement applications
- Wire-wound, 100 ohm DIN platinum (0.00385) construction
- Low thermal inertia allows for very fast response times
- 100.00 ±0.22W at 0°C ±0.25% of temperature reading 260°C continuous
- Sensors can be installed using Omegabond® 101 and 200 epoxies
- Cement on RTD with 914.4mm leads
Product details
| RTD Type |
Component with Leads |
| RTD Accuracy |
- |
| Measured Temperature Min |
-200°C |
| Resistance @ 0°C |
100ohm |
| Probe Material |
- |
| Probe Length |
- |
| Cable Length - Imperial |
3ft |
| Wire Configuration |
3-Wire |
| SVHC |
No SVHC (04-Feb-2026) |
| Sensing Temperature Max |
260°C |
| Resistance |
100ohm |
| Measured Temperature Max |
260°C |
| RTD Element Material |
Platinum |
| Probe Diameter |
- |
| Cable Length - Metric |
914.4mm |
| Cable Termination |
Wire Leaded |
| Product Range |
- |
Other details
| Brand |
OMEGA |
| Part Number |
SRTD-2 |
| Quantity |
Each |
| Technical Data Sheet (187.70KB) EN |
View or download |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
