| ₹ 721565.0 includes GST and import duties. | |
| B2B customers can avail ₹ 110038.66 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
Providing everything needed for a flexible assisted listening system in public venues, the Williams AV Infinium Flex System Package is compatible with FM, Wi-Fi, Dante, and Auracast broadcast audio systems, ideal for allowing venues to accommodate guests using various receivers and hearing devices. This bundle includes an FM T55C D FM and Wi-Fi Transmitter, a BA CT1 Infinium Auracast Controller, a rackmount kit, an antenna, four handheld FM receivers, four earphones, two neck loops, two dual-bay battery chargers, and two hearing assistance wall plaques.
Note: Receivers are sold separately. The Infinium Flex System Package is available only in the Americas, where operation in the 72 to 76 MHz FM band is permitted.
System integrators looking for a quality FM and Wi-Fi transmitter with Dante support will be impressed with the FM T55 CD FM+ and Wi-Fi Assistive Listening System with Dante from Williams Sound. This versatile assisted listening dual-band broadcast transmitter is well suited for performing arts venues, theaters, government buildings, houses of worship, stadiums, and educational facilities. The transmitter features FM and Wi-Fi audio broadcasts from a single input and end users can now listen with either an FM receiver or with their own iOS/Android smartphone via the WaveCAST Listening App (available separately). Built on a professional digital audio (DSP) platform, the FM+ delivers high-quality audio.
Ideal for lecture halls, transportation stations, theaters, and other large venues, the Williams Sound Infinium CT1 Infinium Auracast Controller & Transmitter is a modular system with a discreet transmitter and a rackmount-ready controller that delivers ultralow-latency, high-fidelity audio to unlimited Auracast enabled devices, including hearing aids, cochlear implants, headphones, and Infinium receivers.
The professional AV Controller seamlessly integrates into AV racks with both analog and Dante inputs. You can configure the system locally via the front panel or remotely through a web interface. The compact transmitter installs easily with a single Cat cable carrying both audio and power. It delivers omnidirectional audio coverage up to 328'.
The RPK006 from Williams Sound is a rack mounting kit that allows you to mount two 1/2 rack size products side by side in a standard audio rack.
The Williams Sound ANT005 is a 22' coaxial antenna designed to be used with any personal PA system or large-area FM transmitter that operates at 72 to 76 MHz. It provides the system with a maximum operating range.
The PPA R37 N Select Channel FM Receiver (No Earphone/Batteries) from Williams Sound is a compact and easy-to-use beltpack receiver that allows you to listen to an FM signal in the 72-76MHz band. The receiver offers seek button channel selection between 17 pre-set frequencies, which are digitally synthesized for terrific audio clarity and signal stability. It also features a channel lock capability to prevent accidental changes.
The receiver has an ergonomic design with a detachable belt clip, allowing you to slip it into your pocket or conveniently clip it to your clothing. The standard-sized 3.5mm headphone jack is compatible with mono and stereo headphones and earphones, and also supports induction neckloops and telecoil-equipped hearing aids. The receiver operates on a pair of standard alkaline AA batteries (sold separately). A sleep mode helps to preserve battery life.
You must supply your own earphones/headphones and AA batteries.
The Williams Sound EAR022 is a single-sided, clip-on earphone ideal for use with personal listening devices. The clip is designed to fully surround the ear for maximum stability and comfort. The monaural 1/8" mini-plug is compatible with a wide variety of devices.
The Williams Sound NKL 001 is an induction neckloop designed to magnetically couple an audio signal to a telephone coil-equipped (T-Switch) hearing aid. The neckloop has a standard 1/8" mini plug that can be connected to any audio device that has an 8-16 Ohm 1/8" output, such as a beltpack receiver, TV, tape player, etc. The neckloop has a slider so you can adjust the tension, and the 18" cord provides a good amount of slack for use with body-worn devices.
The black CHG 3502 Dual-Bay Bodypack Battery Charger from Williams Sound is used for charging select Williams Sound T36, T46, R37 and Motiva bodypack transmitters and receivers. The two-bay charger allows you to simply dock the components and recharge the NiMH batteries inside without removing them. This configuration includes four AA-size NiMH rechargeable batteries.
The charger's plastic chassis features a red LED for each bay that indicates the battery is being charged. Note that you must have NiMH batteries installed and the components must be set to the NiMH setting. It takes 16 hours to fully recharge the batteries, and it's safe to leave the units in the charger even after the batteries have fully charged.
| Protocol | Dante over 1 x RJ45 Connector |
| Audio | Audio Processor Functions: DSP based; Compression: 1:1, 1.5:1 or 2:1; High-Pass and Low-pass Filter FrequencyControl, Music, Voice and Hearing Assistance Audio Presets Frequency Response: 31 Hz to 16 kHz, ±3 dB (re: 1 kHz, ±3 dB) (Music Audio Preset) Signal-to-Noise Ratio: 67 dB (Typical) Transmitted RF Total Harmonic Distortion: Less than 0.25% at 1 kHz (RF Output) Common Mode Rejection: >57 dB at 1 kHz, Mic or Line Audio Inputs: Combo 3-Pin XLR-1/4" / 6.35 mm (TRS) Jack for Balanced or Unbalanced Line Level, or Balanced or Unbalanced Microphone with Selectable Phantom Power Audio Input Gain Adjust: Adjustable from +24 to -60 dB, in 1 dB Steps from Front Screen or Web Interface. Phantom Power: 14.4 VDC Applied Through 2.2 Kilohm Resistors to Analog Combo Jack: Pin 2 and Pin 3 on XLR Jack, or Tip and Ring on 1/4" TRS Jack Audio Level Display: Front Screen Bar Graph Display, Each Segment Representing 3 dB. It Ranges from -18 (1 Segment Lit) to +12 dB (10 Segments Lit). Over-Range Warning is Indicated by OVLD and Flashing Empty Bar Headphone Output: 1/4" TRS Stereo Jack, Mono Signal, 33 Ohms Approvals FCC, RoHS3, WEEE, Industry Canada |
| RF Carrier Frequency Range | Operating Frequencies: 72.1 to 75.9 MHz, 17 Wideband Channels (Selectable) Frequency Accuracy: ±2 PPM Stability Deviation: ±75 kHz Maximum Preemphasis: 75 Microseconds RF Field Strength: Does Not Exceed 80 mV/m at 9.9' / 3 m Compatible Antennas: ANT 005, ANT 021, ANT 024, ANT 025, ANT 029. The FCC Requires This Device to be Used with Approved FCC 15.203 Compliant Antennas and Be Professionally Installed. Refer to Williams AV's Antenna Selection Install Guide for Compliant Antennas for This Product. Refer to Williams AV's Antenna Selection Install Guide for FCC-compliant Antennas for This Product Transmission Range: Up to 1000' / 304 m with ANT 005 Coaxial Antenna Mounted on Rear Chassis F-Connector RF Outputs: #10-32 Stud Connector in Center of Unit (PCB Mounted) F-Connector on Rear Chassis RF Transmit (RF) Power Indicator: OLED On Air Indicator with 4 States Indicating Power Level Off, Low, Medium, and Full Power RF Time Out (Sleep Mode): 30 Minutes Duration, 4 Hours Duration, or Always On; Selected via Web Interface When Audio Drops Below -18 dB, the Selected Duration Begins, and When it Expires, the Unit Stops Transmitting and Goes into a Low-Power (Sleep) Mode. Any Button Press Awakens the Unit and It Begins Transmitting Again |
| Enclosure | Color: Black Rackmount: Standard 19" Rack, One EIA Rack Space High, 1/2 Space Wide. 1 to 2 Units Can Be Mounted in a Single Rack Space with Optional Rackmount Kits Power Supply: Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz IEC Line Cord; Output: 24 VDC, 750 mA, 18 W (2.5 mm ID Center Positive Barrel Connector) Power ON Indicator: Push On/Push Off Latching Power Button with Backlight. Green Backlight Indicates Power ON, Backlight Off Indicates Power Off Temperature Range Operating: +32 to +122° F / 0 to 50° C) Storage: -4 to +158° F / -20 to 70° C Ethernet: RJ-45 on the Back of the Unit Supports Cat 5e Cable Lengths up to 328' 100 m 10/100 Base-T IEEE 802.3 Compliant, Unique MAC Address. The RJ-45 Jack is Used for Web Interface and Streaming Audio Out An External Router/ DHCP Server is Required to Stream Audio to Receiving Devices User Interfaces: 3.12" High-Resolution OLED Display with Selections via Buttons Hosted Web Telnet Commands Over Ethernet |
| Dimensions (W x D x H) | 8.45 x 8.25 x 1.72" / 21.5 x 21.0 x 4.4 cm |
| Weight | 3.2 lb / 1.5 kg |
| Package Weight | 4.925 lb |
| Box Dimensions (LxWxH) | 13.5 x 10.4 x 3.5" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 707133.7 |
| 3-5 | ₹ 699918.05 |
| 5-10 | ₹ 685486.75 |
| 10+ | ₹ 671055.45 |
Bulk discount will be automatically applied during checkout based on quantity.