| ₹ 99999999.0 includes GST and import duties. | |
| B2B customers can avail ₹ 15249999.85 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
The Model 374A Four-Channel Dante Intercom Beltpack from Studio Technologies provides a full feature set for a wide range of broadcast needs. Flexibility is crucial for broadcast applications, which is why the Model 374A has four independent talk and listen channels that are configurable via Dante audio-over-Ethernet and STController. The back-panel 5-pin XLR female connector supports an array of headsets—mono or stereo—and dynamic or electret microphones. Two separate remote control inputs are available for intercom use, while the unit also supports Power-over-Ethernet (PoE).
| Network Audio Technology | Type: Dante Audio-Over-Ethernet AES67-2018 Support: Yes Dante Domain Manager (DDM) Support: Yes Bit Depth: Up to 24 Sample Rate: 48 kHz Number of Transmitter (Output) Channels: 4 Number of Receiver (Input) Channels: 4 Dante Audio Flows: 4; 2 Transmitter, 2 Receiver |
| Network Interface | Type: 100BASE-TX, Twisted-Pair Ethernet, Power-Over-Ethernet (PoE) Supported Data Rate: 100 Mb/s (10 Mb/s and 1000 Mb/s GigE Ethernet Not Supported) |
| Audio Channels | Talk: 4 Channels Listen: 4 Channels |
| Microphone Input | Compatibility: Dynamic or Electret (Low-Voltage DC-Powered) Microphones Type: Unbalanced Electret Microphone Power: 3.3 VDC via 2.00 k Resistor, Selectable On/Off Gain: 22, 30, 42, or 48 dB, Selectable Frequency Response: 50 Hz to 10 kHz, -3 dB Distortion (THD+N): <0.02%, 1 kHz, 22 dB gain Noise Floor: -95 dBFS (A-weighted) |
| Compressor | Threshold: 1.5 dB Above Nominal Level (-18.5 dBFS) Slope: 2:1 Status LED: Compressor Active |
| Headphone Output | Type: 2-Channel Compatibility: Intended for Connection to Stereo (Dual-Channel) or Monaural (Single-Channel) Headsets with Nominal Impedance of 50 Ohms or Greater Maximum Output Voltage: 3.8 Vrms, 1 kHz, 150-Ohm Load Frequency Response: 20 Hz to 10 kHz, -3 dB Distortion (THD+N): <0.002% Dynamic Range: >100 dB |
| Call Functions | Receive Support: Channels 1-4 Send Support: Channels 1-3 Signaling Method: 20 kHz, ±800 Hz, Within Audio Channels Receive Level: -27 dBFS Minimum Send Level: -20 dBFS |
| Remote Control Input | Number of Inputs: 2 Function: Configurable, Can Mimic the Action of Any Talk Button Function Type: Active Low, 1 mA Maximum, Input Pulled up to 3.3 VDC via 3.4 K Ohm Resistors |
| Connectors | Headset: 5-Pin Female XLR Remote Control Inputs: 3-Conductor (TRS) 3.5 mm Jack Ethernet: Neutrik NE8FBH etherCON RJ45 Receptacle USB-A Receptacle (Located Inside Model 374A's Enclosure and Used Only for Application Firmware Updates) |
| Environmental | Operating Temperature: 32 to 122°F / 0 to 50°C Storage Temperature: -40 to 158°F / -40 to 70°C Humidity: 5 to 95%, Non-Condensing |
| Dimensions | 4.8 x 3.6 x 1.6" / 12.6 x 9.2 x 4.0 cm |
| Weight | 0.6 lb / 0.3 kg |
| Package Weight | 1.085 lb |
| Box Dimensions (LxWxH) | 12.1 x 7.2 x 3.8" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 97999999.02 |
| 3-5 | ₹ 96999999.03 |
| 5-10 | ₹ 94999999.05 |
| 10+ | ₹ 92999999.07 |
Bulk discount will be automatically applied during checkout based on quantity.