Stmicroelectronics STM32F373VCT6 ARM MCU 16 Bit Sigma Delta ADC STM32 Family STM32F3 Series Microcontrollers Cortex-M4F

The STM32F373VCT6 is a STM32 F3 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), high-speed embedded memories (Flash memory up to 256kB and 16kB of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The device offer a fast 12-bit ADCs, 16-bit sigma-delta (Σ-�) ADCs, two comparators, two DACs (DAC1 with 2 channels and DAC2 with 1 channel), a low-power RTC, nine general-purpose 16-bit timers, two general-purpose 32-bit timers, as well as standard and advanced communication interfaces - two I²Cs, three SPIs, three I²Ss, three USARTs, a CAN and an USB FS device.

• 1.25 DMIPS/MHz (Dhrystone 2.1)
• CRC calculation unit
• Power-on/Power down reset (POR/PDR)
• Programmable voltage detector (PVD)
• Low power modes - Sleep, stop, standby
• VBAT supply for RTC and backup registers
• 4 to 32MHz Crystal oscillator
• 32kHz Oscillator for RTC with calibration
• 8MHz Internal RC with x16 PLL option
• 40kHz Internal oscillator
• 12-channel DMA Controller
• Up to 24 capacitive sensing channels
• Independent and system watchdog timers
• SysTick Timer
• Three 16-bit Basic timers to drive the DAC
• Calendar RTC with alarm and periodic wakeup from Stop/Standby
• CAN interface (2.0B Active)
• HDMI-CEC Bus interface
• USB 2.0 full speed interface
• Serial wire devices, JTAG

Applications

Industrial

Warnings Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Other details

Brand	STMICROELECTRONICS
Part Number	STM32F373VCT6
Quantity	Each
Technical Data Sheet EN
CAD CadSoft_EAGLE EN
Product Change Notice EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.