| ₹ 431835.0 includes GST and import duties. | |
| B2B customers can avail ₹ 65854.84 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
SPL PHONITOR xe Overview
- 1Description
- 2Built-in DAC768
- 3Headphone Outputs on the Front and Back
- 4VU Meters
- 5Dual Power Amp for Balanced Headphones
- 6Matrix Section
- 7Remote Control Compatibility
Styled in red, the SPL Phonitor xe is a headphone amplifier with a built-in 32-bit DAC. It's designed for pro audio and hi-fi applications. On the analog side, it sports XLR and RCA inputs, while digital connections are secured over S/PDIF, TOSLINK, USB, or AES connections. You can switch among the inputs with a prominent Source knob. Output jacks for headphones are provided on both the front and rear of the Phonitor xe.
You'll note one set of 4-pin XLR inputs for balanced headphones, and one set for conventional, 1/4" unbalanced headphones. You can switch between the inputs on the front and rear, so you can compare different sets of headphones easily. Please note that you cannot use both balanced and unbalanced headphones at the same time.
Of interest to audiophiles who usually prefer loudspeakers is the Phonitor Matrix, which aims to create an experience akin to listening to studio monitors. It simulates the effect of audio emanating from one speaker hitting the opposing ear. More than a simple crossfeed controller, this Matrix can simulate different-sized listening environments and different speaker angles.
This application is designed not only to promote a more realistic listening experience, but to reduce listener fatigue. The control for this is variable: you can set the level of crossfeed, as well as the simulated speaker angle to emulate a variety of speaker-placement scenarios. Ideally, you'd set this control to correspond to your actual loudspeaker arrangement.
You'll also note a Mode switch that dictates several types of operation. Stereo and mono playback modes are achievable through this switch, as is a Laterality mode. Laterality aims to correct the mix for any hearing damage you might have incurred throughout your long career of mixing/listening to records; if you experience broadband hearing in the left ear, for example, you can favor more signal coming into the left channel. You're given 2.25 dB of range for this control, making the adjustments very fine indeed.
Via DIP switches on the bottom of the unit, you can drive headphones that require more output power, or change the sensitivity of the RCA input between -10 dBV and 0 dBu. The Phonitor xe utilizes SPL's VOLTAiR 120V Rail Technology to maintain high-headroom and preserve audio clarity by processing audio signals with ?60 VDC of power.
In the Box
- SPL Phonitor xe Headphone Amplifier and DAC (Red)
- Power Cable
- Limited 2-Year Manufacturer Warranty
- Description
- Built-in DAC768
- Headphone Outputs on the Front and Back
- VU Meters
- Dual Power Amp for Balanced Headphones
- Matrix Section
- Remote Control Compatibility
SPL PHONITOR xe Specs
| Form Factor | Tabletop |
| Number of Headphone Channels | Single Channel |
| Headphone Output Power | 1 W per Side into 600 Ohms (Max, 1 kHz) 2 W per Side into 300 Ohms (Max, 1 kHz) 3.7 W per Side into 120 Ohms (Max, 1 kHz) 2.9 W per Side into 47 Ohms (Max, 1 kHz) 2.7 W per Side into 32 Ohms (Max, 1 kHz) |
| Digital Chipset | DAC: SPL DAC768 |
| Analog Audio I/O | 2 x XLR 3-Pin Balanced Input 1 x Stereo RCA Unbalanced Input 2 x XLR 4-Pin Balanced Output 2 x 1/4" TRS Unbalanced Output |
| Digital Audio I/O | 1 x RCA Coaxial Input 1 x TOSLINK Optical Input 1 x XLR 3-Pin AES3 Input |
| USB | 1 x USB-B |
| Frequency Response | Outputs: 10 Hz to 300 kHz (Balanced) 10 Hz to 300 kHz (Unbalanced) |
| Maximum Input Level | 32.5 dBu (Balanced or Unbalanced) |
| Maximum Output Level | +30 dBu |
| Dynamic Range | Outputs: 130.5 dB (Balanced) 135.5 dB (Unbalanced) |
| Impedance | Inputs: 20 Kilohms (Balanced) 10 Kilohms (Unbalanced) Outputs: 0.36 Ohms (Balanced) 0.18 Ohms (Unbalanced) |
| THD+N | XLR Balanced Headphone Outputs: 0.00082% (at 0 dBu, 1 kHz, 100-Kilohm Load) 1/4" Headphone Outputs: 0.00082% (at 0 dBu, 1 kHz, 100-Kilohm Load, Unbalanced) |
| Noise | -98 dBu (A-Weighted, Balanced) -103 dB (A-Weighted, Unbalanced) |
| Crosstalk | Balanced Headphone Outputs: -90 dB (1 kHz) Headphone Outputs: -90 dB (1 kHz) |
| Damping Factor | Outputs: 180 at 40 Ohms (Balanced) 180 at 40 Ohms (Unbalanced) |
| Sample Rates | Coaxial S/PDIF: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (PCM) Optical S/PDIF: 44.1 / 48 / 88.2 / 96 kHz (PCM) USB Input: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 / 352.8 / 384 / 705.6 / 768 kHz (PCM) 2.8 / 5.6 / 11.2 MHz (DSD) AES3: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (PCM) |
| Bit Depths | 32-Bit |
| Rail Voltage | Analog: ±60 V |
| AC Input Power | User Selectable: 115 VAC, 60 Hz (T 1 A 250 V) 230 VAC, 50 Hz (T 500 mA 250 V) |
| Power Consumption | 0.7 W (Standby) 40 VA (Maximum) |
| Dimensions | 13 x 10.9 x 3.9" / 330 x 278 x 100 mm (with Feet) |
| Weight | 11.2 lb / 5.1 kg |
| Package Weight | 12.01 lb |
| Box Dimensions (LxWxH) | 21.1 x 14.8 x 7.3" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 423198.3 |
| 3-5 | ₹ 418879.95 |
| 5-10 | ₹ 410243.25 |
| 10+ | ₹ 401606.55 |
Bulk discount will be automatically applied during checkout based on quantity.