WF200D is an ultra low power Wi-Fi® transceiver or network co-processor (NCP) targeted for applications where optimal RF performance, low power consumption, and secure end-to-end solution, together with fast time to market, are key requirements. It integrates the Balun, T/R switch, LNA and PA for best possible RF performance. Co-existence with other external 2.4GHz radios is supported. Power conscious devices can take advantage of these features in both active and sleep modes. For security sensitive applications, it provides secure boot and a secure and encrypted host interface. Robust security is made possible with a native integrated true random number generator and OTP memory for confidential encryption key storage. Typical applications are industrial, home and building automation, home appliances, security solutions, retail and commercial, commercial transportation, consumer medical, sports and fitness.
- IEEE 802.11 b/g/n compliant, TX power: +17dBm (at pin), RX sensitivity: -96.7dBm (at pin)
- Integrated antenna diversity support, ultra-low power consumption, secure and signed software
- Encrypted host interface communication, Linux and RTOS host support
- OTP included removing the need for an external EEPROM, 802.11 split, full MAC architecture support
- Complete network co-processor (NCP) support for Linux and RTOS external hosts
- Short guard interval (SGI) for 802.11n optimal throughput, A-MPDU Rx and Tx for high MAC throughput
- 2 x 2.4GHz antenna pads for full antenna diversity support or FEM support
- Encrypted host interface, dedicated hardware acceleration block, AES/WEP hardware acceleration
- SDIO (1-bit and 4-bit SD mode at 26MHz), SPI (1-bit at 52MHz) host interfaces
- 1.62 to 3.6V (VDDD/VDDIO/VDDRF), 3.0 to 3.6V (VDDPA), QFN32 package, -40 to 105°C temperature range
Product details
| Data Rate:
72.2Mbps
|
| RF / IF Modulation:
-
|
| Frequency Min:
2.412GHz
|
| Frequency Max:
2.484GHz
|
| Receiving Current:
47.6mA
|
| RF IC Case Style:
QFN-EP
|
| No. of Pins:
32Pins
|
| Supply Voltage Min:
1.62V
|
| Supply Voltage Max:
3.6V
|
| Transmitting Current:
108mA
|
| Output Power (dBm):
17dBm
|
| Sensitivity dBm:
-96.7dBm
|
| RF Transceiver Applications:
Home & Building Automation, Industrial, Retail, Health & Medical, Sports & Fitness
|
| Operating Temperature Min:
-40°C
|
| Operating Temperature Max:
105°C
|
| Product Range:
-
|
Other details
| Brand |
SILICON LABS |
| Part Number |
WF200D |
| Quantity |
Each |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
