SHAPE Complete Rig System for RED WEAPON EPIC-W, SCARLET-W, and RAVEN Cameras

The Complete Rig System from SHAPE is a camera support system designed for RED WEAPON EPIC-W, SCARLET-W, and RAVEN cameras. It includes the REVOLT VCT universal baseplate, a top plate with extendable top handle, a pair of telescopic handles compatible with ARRI rosettes, a 4 x 5.6" matte box, and a snap-on follow focus unit. The follow focus snaps onto 15mm rods, allowing for quick attachment, removal, and repositioning. The matte box features a swing-away system and two 4 x 5.6" rotating filter stages.

The REVOLT VCT Universal Baseplate comes integrated with a shoulder mount, a pair of 8" standard 15mm rods, and a pair of 4" standard 15mm rods. The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center. The included left and right telescopic handgrips attach to the sides of the baseplate via standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately 2" of arm extension allowing you to adjust the arms for your comfort.

The center of the top plate is designed to insert and mount the top handle using an Allen key (included). The plate attaches to the camera via four 1/4"-20 stainless screws and also features eight 1/4"-20 and four 3/8"-20 threaded holes for accessory attachment. The top plate also includes a push-button arm with view finder bracket that can easily be attached to the top handle for an optimal setup of the rig. Both the baseplate as well as the top plate feature a magnet compartment for Allen key storage.

The top handle features six threaded holes that allow for mounting the push-button arm to the top plate. It also features one 15mm rod clamp for attaching a view finder (not included) to the push-button arm. Thanks to the four 1/4"-20 threaded holes in the front and two hot brackets (front and back) that allow for multiple accessory attachment. The handle grip frame is made from robust CNC-machined aluminum and the finger grip is made from Canadian maple wood for maximum comfort. You can quickly slide horizontally and fix the handle length for an extension of approximately 3" from its original position, thanks to the ratchet knob bracket system.

Note: This bundle is not compatible with the RED DRAGON, EPIC, and SCARLET cameras.

• REVOLT VCT Universal Baseplate

  Featuring a sliding camera plate, SHAPE 's REVOLT VCT Universal Baseplate can accommodate rigs of varying sizes. Simply attach your camera via 1/4"-20 or 3/8"-16 screws to the top plate, and slide it onto the shoulder plate. Fore and aft movement allows you to balance the weight of your setup properly. Further adjustments can be made by moving the shoulder pad. The 15mm rod clamps at the front and rear of the baseplate allow you to secure 15mm accessories such as a matte box, follow focus, lens motors, lens supports, battery plates, or external recorders. Since the front rod clamp is attached to the top plate, the rod-mounted accessories don't need to be repositioned as the rig is adjusted. Additionally, handles can be mounted to the ARRI standard rosettes on either side of the plate. When not shoulder-mounted, the baseplate can be secured to a standard VCT-14 ENG quick release in a matter of seconds, saving time on set.

  The sliding baseplate provides a quick positioning of your camera and accessories for an optimal adjustment of your camera's balance center.

  Height-adjustable rod clamp for aligning the 15mm rods at the proper LWS height in relation to the optical axis.

  Front and rear rod clamps allow you to extend your rig forwards and backwards.

  Built-in storage areas for extra screws and the Allen wrench ensure that necessary adjustment tools are always close at hand.

  Safety pins and spring-loaded levers prevent the top plate from sliding unintentionally.

  Soft and ergonomic shoulder pad.

  UPC: 629266006672
• Telescopic Handles with ARRI Rosettes (Black)

  The black Telescopic Handles with ARRI Rosettes from SHAPE  are left and right handgrips that can be attached to cameras and camera support hardware that has standard ARRI rosettes. Each arm features three points of articulation, combined with the approximately two inches of arm extension allows you to adjust the arms for your comfort. The arms attach to your camera or support via an ARRI compatible rosette with spring-loaded locking levers, which allow you to lock your arms in place without having a full 360° of rotation.
  
  Shape's unique push-button articulating joint provides additional articulation near the rosette, while a second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. A second spring-loaded locking lever along the arms allows you to extend the arms up to two inches and rotate the handgrips throughout 360°. The arms are indexed for extension and rotation, so you can quickly move between known setups.

  The push-button locking joint enables independent rotation throughout 360°.

  Spring-loaded locking levers allow you to tighten or loosen the lever even when you do not have space to turn the lever throughout the entire 360° range.

  The arms feature two inches of extension and are indexed every 5mm of extension.

  The arms can rotate through 360° and feature 30° of index markings.

  UPC: 629266002162
• 15mm Aluminum Rods (Pair, 4")

  This pair of  Shape 15mm Aluminum Rods (4") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

  
  The rods are each 15mm in diameter, 4 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

  UPC: 629266001677
• 15mm Aluminum Rods (Pair, 8")

  This pair of  Shape 15mm Aluminum Rods (8") connect into your camera rig, extend it, and let you add various Shape and third-party accessories compatible with 15mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

  
  The rods are each 15mm in diameter, 8 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

  UPC: 629266001691
• Top Plate Extendable Handle & EVF Mount for Select RED Cameras

  Provided by third party:

  The top handle and top plate are designed to give you a solid and comfortable grip for the manipulation of your RED camera. The Push Button Arm with view finder bracket can easily be attached to the EVF mount of the top handle for an optimal setup of your RED camera rig.
  The handle grip frame is made from robust CNC machined aluminum and the finger grip is made from genuine Canadian maple wood for maximum comfort. You can quickly adjust and lock the handle length for an extension of approximately 3 inches from its original position in order to optimize the balance of your camera to your lens type.
  

  UPC: 629266006993
• Follow Focus Pro

  The SHAPE Follow Focus Pro mounts on 15mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15mm rods, allowing for quick attachment, removal, and re-positioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth - depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks.

  • Snap-on 15mm rod attachment
  • Adjustable arm
  • Two 0.8 pitch aluminum gears included: 28 teeth and 43 teeth
  • Interchangeable gear position
  • Adjustable hard stops
  • Removable marking disc
  • Industry standard accessory port
  • CNC machined aluminum parts

  UPC: 629266002360
• 2-Stage 4 x 5.6" Matte Box

  The 2-Stage 4 x 5.6" Matte Box from SHAPE can be used as a clip-on matte box or can be mounted on industry-standard 15mm rod system. It is designed for light control, insertion, and adjustment of filters. It features a two-stage rotating 4 x 5.6" filter holder. The matte box accepts lenses with a front diameter up to 114mm. It comes with six step-down rings that allow you to fit lenses with an outer diameter of 52, 58, 62, 67, 72, 77, and 82mm as well.

  Compatibility

  Photo lenses with a minimum diameter of 52mm
  Professional video optics with up to 114mm front diameter

  Includes 6 step-down rings (52 to 82, 58 to 82, 62 to 82, 67 to 82, 72 to 82, 77 to 82mm)

  Made in Canada

  UPC: 629266006481

• Limited Lifetime Warranty

• Limited Lifetime Warranty on CNC Machined Parts

• Lifetime Warranty Against Defects in Material and Workmanship

• Lifetime Warranty Against Defects in Material and Workmanship

• 0.8 Pitch 28 Teeth Aluminum Gear for Follow Focus Pro

• 0.8 Pitch 43 Teeth Aluminum Gear for Follow Focus Pro

• Limited Lifetime Warranty

• 2-Stage Bracket for 4 x 5.6" Rotary Filters

• Clip-On System

• 15mm Bracket

• French Flag

• 2 x Side Wing

• 6 x Step-Down Ring

• Limited Lifetime Warranty