- For Nikon AF-S 14-24mm f/2.8G ED Lens
- Holds up to Three 150mm-Wide Filters
- No Vignetting with Nikon 14-24mm Lens
- Low-Gap Filter Slot to Prevent Flare
- Secure Attachment to Lens
- Rotates 360°
- Mounting Foam for Correct Lens Position
- Aluminum-Alloy Construction
- Easy Installation
The Sensei Pro 150mm Aluminum Filter Holder is designed to allow for the convenient use of 150mm-wide, 2mm-thick filters with the Nikon AF-S 14-24mm f/2.8G ED Lens without vignetting.
Placement of the filter holder onto a Nikon AF-S 14-24mm f/2.8G ED Lens is easily accomplished by sliding it over that lens's integrated hood. An included mounting foam square intended to be temporarily inserted between the holder's plastic front filter slots acts as a stopper for optimal positioning of the lens. By first using the mounting foam, the lens's integrated hood does not conflict with any filters that will be placed within the filter slots. To prevent flare particularly when using the filter slot closest to the holder with backlit subjects, the space between that slot and the holder has been reduced to less than 2mm.
Once the Sensei Pro 150mm Aluminum Filter Holder is installed, silicone friction strips along its inside diameter helps provide a reliable, yet adjustable connection that allows the holder to be rotated 360°, permitting the use of graduated neutral density and other filters that are enhanced by varied positioning. Two locking knobs along the rear of the filter holder ensure that its grip on the Nikon AF-S 14-24mm f/2.8G ED Lens remains secure.
The Sensei Pro 150mm Aluminum Filter Holder is preinstalled with two pairs of filter slots, a configuration that accommodates two filters. Also included is a third pair of filter slots, which allows up to three filters to be used at the same time.
- Allows filters to be conveniently used with the Nikon AF-S NIKKOR 14-24mm f/2.8G ED Lens without vignetting
- Holds 150mm-wide, 2mm-thick filters
- Preconfigured to hold two filters and can accommodate up to three filters
- The closest filter slot to the holder is only 2mm away to prevent flare with backlit subjects
- Included mounting foam helps to ensure optimal positioning of the holder on a Nikon AF-S NIKKOR 14-24mm f/2.8G ED Lens
- Inner diameter's silicone strips help provide a secure connection
- Locking knobs allow for adjustment of holder's grip
- Durable aluminum-alloy construction
|Material || Filter Holder Plate: Aluminum alloy |
Filter Holder Slots: Plastic
|Compatible Lenses ||Nikon AF-S NIKKOR 14-24mm f/2.8G ED Lens |
|Holds ||Holds up to three 150mm-wide filters up to 2mm thick |
|Rotating ||Yes, 360° |
| Packaging Info |
|Package Weight ||1.0 lb |
|Box Dimensions (LxWxH) ||6.8 x 6.2 x 2.3" |
In the Box
Sensei Pro 150mm Aluminum Filter Holder for Nikon AF-S 14-24mm f/2.8 Lens
- Filter Holder
- 6 x Filter Slots
- 6 x Screws
- Mounting Foam
- Limited 1-Year Warranty
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.