BD9G201UEFJ-LBE2 is a 1ch buck converter. It is a buck converter with a built-in high-side MOSFET. It has an input voltage range of 4.5V to 42V. The current mode architecture provides a fast transient response and a simple phase compensation setup. The IC is mainly used as a secondary side power supply: for example, a step-down output of 3.3V/5V can be produced from a voltage power supply such as 12V or 24V. In addition, it has a synchronization function with an external CLK that provides noise management. It is used in industrial distributed-power applications.
- Long time support product for industrial applications
- Integrated Nch MOSFET
- Synchronizes to external clock 250KHz to 500KHz
- ON/OFF control through EN terminal (standby current of 0µA)
- Small package (HTSOP-J8ES)
- Low dropout operation
- Input voltage range from 4.5V to 42V
- Maximum output current is 1.5A (maximum)
- Operating temperature range from -40°C to +105°C
- Dimension is 4.9mm W (typ) x 6mm D (typ) x 1mm H (max)
Product details
| Input Voltage Min:
4.5V
|
| Input Voltage Max:
42V
|
| No. of Outputs:
1Outputs
|
| No. of Pins:
8Pins
|
| Output Current:
1.5A
|
| Output Voltage Min:
800mV
|
| Output Voltage Max:
42V
|
| Switching Frequency:
500kHz
|
| Operating Temperature Max:
105°C
|
Other details
| Brand |
ROHM |
| Part Number |
BD9G201UEFJ-LBE2 |
| Quantity |
Each (Supplied on Cut Tape) |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
