- Ideal for Video & DSLR Cameras
- Integrated Rycote Lyre Shockmount
- Matched Pair, 1/2" Condenser Capsules
- XY Stereo Configuration
- Level Switch: -10 / 0 / +20 dB
- High-Pass Filter Switch: 75 Hz
- Kevlar-Reinforced Braided Cable
- 1/8" (3.5mm) Output Connector
- 9V Battery Powered
- Includes Foam Windscreen
The Stereo VideoMic Pro Rycote from Rode builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.
The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.
- Broadcast-recording-quality on-camera microphone
- Matched pair, 1/2" condenser capsules in X/Y stereo configuration
- Ultra-lightweight, compact form factor
- Two-step high-pass filter (flat, 75 Hz)
- Three-position level control (-10, 0, +20 dB)
- 9V-battery-powered - over 100 hours of use (alkaline)
- Integrated Rycote Lyre shockmount
- Denser foam windscreen
- 1/8" (3.5mm) stereo mini-jack output
- Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
UPC: 698813004805
Transducer | Pressure gradient |
Polar Pattern | XY Cardioid |
Frequency Range | 40 Hz to 20 kHz (selectable HPF @ 75 Hz) |
Sensitivity | -38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz |
Output Impedance | 200 Ohms |
Maximum Output | +4.2 dBu (@ 1% THD into 1 kOhms) |
Dynamic Range | 100 dB |
Maximum SPL | 134 dB, max (1 kHz, 1% THD into 1 kOhms load) |
Signal / Noise | 76 dBA (A-weighted per IED651) |
Power Supply | 9 V alkaline battery |
Connection | 1/8" (3.5 mm) stereo mini-jack |
Signal to Noise Ratio | 76 dBA SPL (A-weighted per IEC651) |
Dimensions (D x W x H) | 4.5 x 3.1 x 5.3" (115 x 80 x 134 mm) |
Weight | 0.26 lb (116 g) (without battery) |
Packaging Info |
Package Weight | 0.6 lb |
Box Dimensions (LxWxH) | 8.5 x 5.1 x 3.2" |
In the Box
Rode Stereo VideoMic Pro Rycote
- Metal Camera Shoe Mount with 3/8" Thread
- Foam Windscreen
- Limited 10-Year Extended Warranty with Registration
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.