Rhino Camera Gear SKU253 Overview
- 1 Description
- 2 Rhino Camera Gear Slider EVO Carbon (24")
- 3 Rhino Camera Gear Flywheel for EVO Sliders
- 4 Rhino Camera Gear Slider EVO Carrying Case (24")
The Rhino Basic Slider Bundle includes a 24" carbon fiber belt-driven slider, a flywheel, and a compact carry case. The slider supports up to 15 lb and features individually adjustable, spring-loaded all-terrain legs. The flywheel attaches to the drive shaft of the slider without any tools and provides inertia dampening to ensure more consistent motion. It adds a little weight, helps evenly disperse your camera load across the rails, and helps maintain momentum, whereas without it, the rails react to the slightest change in the pressure you apply when you move your load with your hand, and these reactions can result in jerkiness that shows up in the editing room.
Rhino Camera Gear Slider EVO Carbon (24")
The Rhino Slider EVO Carbon is a highly versatile, belt-driven camera slider that can adapt to your shooting needs. The system includes lightweight carbon fiber rails that support loads up to 15 lb, which can be swapped for optional 42" rails when longer slides are required. Additionally, optional stainless steel rails are available for when you need to support heavier loads. The slider can also be upgraded to a motorized system with the addition of the separately available Rhino Motion, allowing you to capture smooth live motion and time-lapses with a single motor.
The Rhino Slider EVO features a 3/8"-16 screw on the camera carriage for attaching a ball head or flat-base fluid head. It can be center-mounted on a tripod via 1/4"-20 and 3/8"-16 threaded holes in the center of the rails, or supported using two tripods or stands via 1/4"-20 and 3/8"-16 threads at the ends of the tripod. You can also setup the slider for ground-level or table-top shooting using the included spring-loaded legs with index marks. The legs fold up for compact storage.
Key Features
- Ability to switch between carbon fiber and stainless steel rails (24" and 42" lengths)
- 24" lightweight carbon fiber included
- Supports loads up to 15 lb
- Optional Rhino Motion add-on
- Camera carriage with 3/8"-16 screw
- Integrated carriage brake
- Optional flywheel
- 3/8"-16 and 1/4"-20 mounting threads (center and ends)
- Spring-loaded, folding all-terrain legs with index marks
![]()
UPC: 638170293818
Rhino Camera Gear Flywheel for EVO Sliders
The weighted Rhino Flywheel works in tandem with the belt-drive system on a Rhino Slider EVO, serving as an inertia dampener to help smooth out inconsistencies in your slides to let you capture smoother, more consistent motion from start to finish. It features built-in rubber bumpers and attaches to the drive shaft using a tool-less fastener.
![]()
UPC: 638170293856
Rhino Camera Gear Slider EVO Carrying Case (24")
Store and protect your 24" EVO camera slider with the Rhino Slider EVO Carrying Case . To facilitate fast setups in the field, the case fits a completely assembled slider, including an attached Rhino Motion, Rhino Arc, and even a fluid head thanks to an expandable "pop top" design. A soft interior lining helps protect the slider from scratches, while retaining straps keep the slider secured in place.
Key Features
- Protects your 24" Rhino Slider EVO
- Expandable pop-top lets you keep your fluid head attached
- Retaining straps keep your slider in place
![]()
UPC: 638170293924
In the Box
- Rhino Camera Gear Slider EVO Carbon (24")
- Rhino Camera Gear EVO Carbon Rails (24")
- Camera Carriage
- 2 x End Caps with All-Terrain Legs
- Limited Lifetime Warranty
- Rhino Camera Gear Flywheel for EVO Sliders
- Limited Lifetime Warranty
- Rhino Camera Gear Slider EVO Carrying Case (24")
- Limited Lifetime Warranty
Table of Contents
- Description
- Rhino Camera Gear Slider EVO Carbon (24")
- Rhino Camera Gear Flywheel for EVO Sliders
- Rhino Camera Gear Slider EVO Carrying Case (24")
Rhino Camera Gear Slider EVO Carbon (24") Specs
Performance
| Load Capacity | 15 lb / 6.8 kg |
Mounting
| Tripod Mounting | 3 x 1/4"-20 Female Thread
3 x 3/8"-16 Female Thread |
Carriage
| Camera Mounting Screw | 3/8"-16 Male |
Physical
| Track Length | 24" / 61 cm |
| Weight | 4 lb / 1.8 kg |
Packaging Info
| Package Weight | 6.05 lb |
| Box Dimensions (LxWxH) | 29.1 x 10.35 x 3.15" |
Rhino Camera Gear Flywheel for EVO Sliders Specs
| Material | Powder-coated steel |
| Dimensions (Diam. x H) | 4 x 1.5" (10.2 x 3.8 cm) |
Packaging Info
| Package Weight | 1.95 lb |
| Box Dimensions (LxWxH) | 5.35 x 5.3 x 1.95" |
Rhino Camera Gear Slider EVO Carrying Case (24") Specs
| Material | Ballistic nylon |
| Dimensions | 29 x 9 x 4" (73.7 x 22.9 x 10.2 cm) |
| Weight | 3.44 lb (1.56 kg) |
Packaging Info
| Package Weight | 3.35 lb |
| Box Dimensions (LxWxH) | 29 x 9.4 x 4.4" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
