| ₹ 16220.0 includes GST and import duties. | |
| B2B customers can avail ₹ 2473.55 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
PocketWizard PowerST4 Overview
- 1Description
- 2
- 3ControlTL
- 4Manual Power Control
- 5ZoneControl
- 6PowerTracking
- 7Channels/Learn Mode:
- 8Reverse Compatible
- 9Low-Profile Design
- 10No Batteries Required
- 11HyperSync
- 12Programmable and Upgradeable
Using the PocketWizard PowerST4 Receiver for Elinchrom RX can give you near-total remote control over all your Elinchrom RX strobes--with either the MiniTT1 Transmitter or FlexTT5 Transceiver (both optional, use of one is required) on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now change flash power settings directly from your camera position. Use the PowerTracking function and when you change ISO or aperture, the lights automatically adjust their power setting.
By adding the optional AC3 ZoneController, you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. HyperSync gives you the ability to sync at up to 1/8000s at full power (depending on your flash and camera). Total control (over your lights, anyway) is yours!
Important Information:
Units sold in USA use 344.0 MHz for channels 1-16, and 346.5-354.0 MHz for channels 17-32 � Units sold in Europe use 433.62 MHz for channels 1-16, and 434.22 for channels 17-32 � USA and Euro models cannot converse with each other � USA models may interfere with devices in Europe
In the Box
- PocketWizard PowerST4 Receiver for Elinchrom RX
- Quick Guide
- Description
- ControlTL
- Manual Power Control
- ZoneControl
- PowerTracking
- Channels/Learn Mode:
- Reverse Compatible
- Low-Profile Design
- No Batteries Required
- HyperSync
- Programmable and Upgradeable
PocketWizard PowerST4 Specs
| Channels | 52.0 |
| Radio Frequency | 340 to 354 MHz |
| Inputs/Outputs | 1 x Mini-USB |
| Operating Temperature | 5 to 120°F / -15 to 49°C |
| Storage Temperature | 22 to 185°F / -6 to 85°C |
| Dimensions | Receiver: 3.6 x 2.2 x 1" / 9.2 x 5.5 x 2.5 cm |
| Weight | 0.77 oz / 21.83 g |
| Package Weight | 0.13 lb |
| Box Dimensions (LxWxH) | 5.4 x 5.4 x 2.1" |
PocketWizard PowerST4 Reviews
Useful for the Elinchrom Ranger packs.
Used only one time. Worked fine but didn't always adjust output with my AC3 controller. Not sure why.
Works great!
Worked seamlessly with the Elinchrom RX 600 mono lights and the PocketWizard AC3. Strobes fired every time with the Mini TT1 and the Sekonic L-358. Requires programing to match the channels but that took only a few seconds after down loading the most current firmware.
ADDICTING!
I am SOOOO glad I returned to PocketWizard! With the new FlexTTL, the AC3, and these ST4 units...I am in heaven!! It definitely takes a bit of understanding to work with this system, as far as the Power Tracking, but it's brilliant when you use it!! The only thing I wish, was that there was a dual channel so that I can dumb them down to be able to use with a mixed system of MultiMax units, which are not capable of running on the ControlTL channels. These things are ridiculously small, too!! and NO batteries.....HURRRRAY!!!
Great Reciever
Incredibly small, the reciever is consistent and reliable. My only problem with it is I wish it had a 1/4-20 screw mount for mounting it to an extension bar to get it away from the lightstand to avoid any interference! It has a bunch of added features that I haven't needed to use yet, for example the power tracking feature allows you to make adjustments in camera, and it will automatically adjust the power of the strobe. This is helpful when you can't get to your power pack to manually change the power setting up or down. Overall it is another great product from Pocket Wizard.
Great product
works great on Elinchrom 600RX.
Works Great
Provides freedom to control Elinchrom RX Battery Pack and lights from camera
A Must Have
It simply works great. I connected it to the utility to make sure it was up to date (and it was)...selected the monolight it was being used on....stuck on the back of my monolight and presto! Fired off my camera with the FlexTT5 and got a pop. Literally the easiest thing I've put into use since I've been buying gadgets for my photography.
Radio slaves
Big bonus, no batteries! Just don't forget to get the skyport adaptor for the Ranger models.
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 15895.6 |
| 3-5 | ₹ 15733.4 |
| 5-10 | ₹ 15409.0 |
| 10+ | ₹ 15084.6 |
Bulk discount will be automatically applied during checkout based on quantity.