Pelco EH16 Indoor/Outdoor IP-Enabled Enclosure with 24VAC Input, PoE, Feedthrough Wall Mount, and Sun Shroud for Sarix Series Cameras

The Pelco EH16 Indoor/Outdoor IP-Enabled Enclosure with 24VAC Input, PoE, Feedthrough Wall Mount, and Sun Shroud is designed to house Sarix, Sarix Professional, and the Sarix Enhanced series cameras up to 9 x 3.12 x 3�. This indoor/outdoor camera enclosure is designed for easy installation. Constructed from die-cast aluminum, the enclosure is designed to operate in a wide range of environments and to protect electronic components in temperatures from -22 to 140°F. Factory-installed options include a heater and blower with 24VAC camera power supply. It also features a sun shroud that protects the camera from glare.

The enclosure also includes a 24 VAC or IEEE802.3at power over Ethernet enclosure input voltage, 802.3af-compatible camera power, and appropriate heater and blower power. The IP-enabled enclosure is designed for use with analog and IP cameras that have both fixed and variable focal length lenses (with or without auto iris operation). The tethered, detachable lid provides easy access to the innovative camera sled. Two adjustable glands (PG9 and PG11) on the bottom of the enclosure allow for easy installation of the power and video cables.

The enclosure is suitable for small- to medium-size analog and IP cameras and can be mounted to Pelco�s EM16 Feedthrough Wall Mount (included), EM1450 Non-Feedthrough Wall Mount, or any other Pelco light-to-medium duty mount (not included).

High reliability die-cast construction For operation in the temperature range from -22 to 140°F Meets IP66 and NEMA Type 4X standards IK10 mechanical impact resistance Low-power heater and blower with 24VAC camera power supply PoE can be used to power the heater and blower Advanced optics for megapixel camera support Cable entry glands and mounting holes on bottom of enclosure Designed for indoor/outdoor applications Easy access for servicing and installation Built-in sun shroud protects the camera from glare UPC: 700880328545

Camera Mounting	Single slot for adjustable camera positioning on snap-in camera sled
Compatible Cameras	Accepts camera and lens combinations (including BNC connector) up to 9.0 x 3.1 x 3.0" (22.8 x 7.9 x 7.6 cm) (LxWxH) Recommended Cameras: Sarix, Sarix Professional, and the Sarix Enhanced series
Viewing Window	0.1" (0.3 cm) thick, high optic grade, scratch-resistant Lexan
Viewing Area (HxW)	2.5 x 2.8" (6.3 x 7.1 cm)
Cable Entry	1 x PG9 and 1 x PG11 compression glands on bottom Cable Entry Holes: 0.4 x 0.7" (1.0 x 1.9 cm) and 0.4 x 0.6" (1.0 x 1.6 cm) 0.7" (1.9 cm) hole will accept 1/2" NPT conduit fitting when enlarged to 0.9" (2.2 cm); 0.6" (1.6 cm) hole will accept 1/4" NPT conduit fitting
Cable Diameter	Maximum: PG9 0.3" (0.8 cm), PG11 0.4" (1.0 cm)
Lid	Lid Fastening: 3 x Torx-head T30 screws

Input Power	24 VAC, IEEE802.3at
Input Voltage	PoE IEEE802.3at, 24 VAC ±10% VAC
Power	Enclosure Power Consumption: 10 W Maximum Power Consumption Capacity: 25 W Provided Camera Power: 13 W

Construction	Camera: Die-cast aluminum Wall Mount/Sun Shroud: Aluminum
Finish	Alodine with gray polyester powder coat
Environment	Indoor/Outdoor Ambient Temperature: -22 to 140°F (-30 to 60°C)
Certifications	CE, UL/cUL Listed, meets NEMA Type 4X and IP66 standards, IK10 Mechanical Impact Resistance
Length	Base: 14.0" (35.6 cm) Overall: 16.01" (40.67 cm)
Weight	Camera: 5.0 lb (2.3 kg) Wall Mount: 0.6 lb (0.3 kg)

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.