SC18IS606PWJ is a I²C-Bus to SPI Bridge IC in a 16 pin TSSOP package. SC18IS606 is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I2C-bus. SC18IS606 operates as an I2C-bus target transmitter or target-receiver and an SPI. SC18IS606 controls all the SPI bus specific sequences, protocol, and timing. SC18IS606 has its own internal oscillator, and it supports three SPI chip select outputs that may be configured as GPIO when not used as SPI chip select.
- I2C-bus target interface operating up to 400kHz
- SPI operating up to 1.8Mbit/s
- 1024byte data buffer
- Up to three programmable I/O pins
- Operating supply voltage: 1.71 V to 3.6 V
- Low power mode, internal oscillator
- Active low interrupt output
- ESD protection exceeds 2000 V HBM per JESD22-A114
- Latch-up testing is done to JEDEC Standard JESD78 that exceeds 100 mA
Other details
| Brand |
NXP |
| Part Number |
SC18IS606PWJ |
| Quantity |
Each (Supplied on Cut Tape) |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
