SC18IM704PWJ is a UART to I²C-bus bridge IC in a 16 pin TSSOP package. SC18IM704 is designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I2C-bus; this allows the microcontroller or microprocessor to communicate directly with other I2C-bus devices. SC18IM704 can operate as an I2C-bus controller. SC18IM704 controls all the I2C-bus specific sequences, protocol, arbitration and timing. The host communicates with SC18IM704 with ASCII messages protocol; this makes the control sequences from the host to SC18IM704 become very simple.
- Eight programmable I/O pins
- High-speed UART baud rate up to 460.8 kbit/s
- Fast-mode I2C-bus 375kHz
- 256-byte TX FIFO, 256-byte RX FIFO
- Programmable baud rate generator
- 1.71V and 3.6V operation
- Sleep mode (power-down)
- UART message format resembles I 2C-bus transaction format
- Multi-controller capability
- 5V tolerance on the input pins
Other details
| Brand |
NXP |
| Part Number |
SC18IM704PWJ |
| Quantity |
Each (Supplied on Cut Tape) |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
