NX20P0407UKZ is an USB Type-C CC and SBU protection IC device. It provides 28V short-to-VBUS overvoltage protection to CC1/CC2 and SBU1/SBU2 pins. USB Type-C allows VBUS voltage to increase up to 20V through Power delivery protocol. CC1/2 and SBU1/2 pins can be shorted to VBUS due to mechanical twisting and sliding of the connector since Type-C connector contact pins are 25% closer to each other than a micro USB connector. Moisture or fine dust may also cause the 20V VBUS pin to be shorted to adjacent pins. It enables CC and SBU pins to be more robust in even abnormal conditions. It is 28VDC tolerant on CON_CC1, CON_CC2, CON_SBU1 and CON_SBU2 pins in connector side and quickly disconnects switches if the voltage is above overvoltage threshold, protecting CC1, CC2, SBU1 and SBU2 in system side from high voltage. Application includes smartphone, tablet, laptop.
- USB Type C CC1/2 and SBU1/2 short protection to VBUS
- CON-CC1 / CON-CC2 : 28VDC, CON-SBU1 / CON-SBU2 : 28VDC
- Rd circuit in CON-CC1/CON-CC2 in dead battery
- Low RDSon switch 160mohm (CC switch), 3.6ohm (SBU switch)
- Robust ESD immunity for CON-CC1/2
- IEC 61000-4-2 contact discharge: 8KV
- IEC 61000-4-2 air discharge: 15KV, +/- 35V surge protection on CON-CC1/2
- Low SYS leakage current is 32µA, CC1/2 leakage current is <1µA
- Fast OVP turn off time is 60ns
- WLCSP12 package, temperature range from -40°C to +85°C
Product details
USB IC Type:
USB Type-C Port Protection
|
USB Standard:
-
|
Supply Voltage Min:
2.5V
|
Supply Voltage Max:
5.5V
|
IC Case / Package:
WLCSP
|
No. of Pins:
12Pins
|
Data Rate:
-
|
No. of Ports:
1Ports
|
Operating Temperature Min:
-40°C
|
Operating Temperature Max:
85°C
|
Product Range:
-
|
Qualification:
-
|
Other details
Brand |
NXP |
Part Number |
NX20P0407UKZ |
Quantity |
Each (Supplied on Cut Tape) |
Technical Data Sheet EN |
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.