NXP LPC804M101JDH20FP ARM MCU LPC Family LPC80x Series Microcontrollers Cortex-M0+ 32 bit 15 MHz KB

The LPC804 are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 15MHz. The LPC804 supports 32KB of flash memory and 4 KB of SRAM. The peripheral complement of the LPC804 includes a CRC engine, two I2C-bus interfaces, up to two USARTs, one SPI interface, Capacitive Touch Interface (Cap Touch), one multi-rate timer, self-wake-up timer, one general purpose 32-bit counter/timer, one 12-bit ADC, one 10-bit DAC, one analog comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, Programmable Logic Unit (PLU), and up to 30 general-purpose I/O pins.

• ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 15MHz with single-cycle multiplier and fast single-cycle I/O port
• ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC)
• AHB multilayer matrix
• Up to 32KB on-chip flash programming memory
• Code Read Protection (CRP)
• 4 KB SRAM
• Boot loader
• Supports Flash In-Application Programming (IAP)
• On-chip ROM APIs for integer divide
• High-speed GPIO interface connected to the ARM Cortex-M0+ I/O bus
• High-current source output driver (20mA) on five pins
• Switch matrix for flexible configuration of each I/O pin function
• One 32-bit general purpose counter/timer
• One 12-bit ADC with up to 12 input channels with multiple internal and external trigger inputs
• One 10-bit DAC
• Two USART interfaces
• Free Running Oscillator (FRO)
• Unique device serial number for identification

Applications

Industrial, Consumer Electronics, Motor Drive & Control, Lighting

Warnings Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Other details

Brand	NXP
Part Number	LPC804M101JDH20FP
Quantity	Each
Technical Data Sheet EN
Product Change Notice EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.