MGJ1D052005SC is a MGJ1 SIP series isolated 1W gate drive DC-DC converter ideal for powering 'high side' and 'low side' gate drive circuits for IGBT/MOSFET, SiC & GaN gate drives in bridge circuits. The asymmetric output voltage allows optimum drive levels for best system efficiency and EMI. The MGJ1 SIP series is characterised for high isolation and dv/dt requirements commonly seen in bridge circuits used in motor drives and inverters, while the MGJ1 SIP high operating temperature rating and construction gives long service life and reliability.
- Nominal voltage is 5VDC
- Output voltage is 20VDC, -5VDC, output current is 40mA, 40mA
- Typical ripple & noise is 20mVpp, typical efficiency is 71.5%
- Reinforced insulation to UL62368-1 recognised
- ANSI/AAMI ES60601-1, 1 MOPP/2 MOOPs pending
- 5.2KVDC isolation test voltage 'hi pot test'
- Ultra low isolation capacitance of 3pF
- Characterised CMTI >200kV/µs
- Continuous barrier withstand voltage 2.4KVDC
- Characterised partial discharge performance
Product details
| Power Supply Applications:
ITE
|
| Input Ratio:
-
|
| Output Power Max:
1W
|
| No. of Outputs:
2 Output
|
| Output Voltage - Output 1:
20V
|
| Output Current - Output 1:
40mA
|
| Output Voltage - Output 2:
-5V
|
| Output Current - Output 2:
40mA
|
| Output Regulation:
-
|
| Isolation Voltage:
5.2kV
|
| DC / DC Converter Type:
SIP
|
| Input Voltage DC Nom:
5V
|
| DC / DC Converter Output Type:
Fixed
|
| Width:
8.8mm
|
| Height:
12.5mm
|
| Depth:
19.5mm
|
| Input Voltage DC Min:
4.5VDC
|
| Input Voltage DC Max:
5.5VDC
|
| Product Range:
MGJ1 SIP Series
|
Other details
| Brand |
MURATA POWER SOLUTIONS |
| Part Number |
MGJ1D052005SC |
| Quantity |
Each |
| Technical Data Sheet EN |
 |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
