Microchip MCP4725A0T-E/CH Digital to Analogue Converter 12 bit I2C Serial 2.7V 5.5V SOT-23 6 Pins

The MCP4725A0T-E/CH is a single channel, buffered voltage output 12bit digital to analogue converter (DAC) with EEPROM memory in 6 pin SOT-23 package. Its on-board precision output amplifier allows it to achieve rail to rail analogue output. This low power, high accuracy DAC input and configuration data can be programmed to non volatile memory (EEPROM) by user using I2C interface command. The non volatile memory feature enables the DAC device to hold DAC input code during power off time and DAC output is available immediately after power up. The MCP4725 includes power on reset (POR) circuit to ensure reliable power up and an on-board charge pump for EEPROM programming voltage. It has two wire I2C compatible serial interface for standard (100KHz), fast (400KHz) or high speed (3.4MHz) mode.

• ±0.2 LSB DNL
• External A0 address pin
• Fast settling time of 6µs
• External voltage reference (VDD)
• Low power consumption
• Single supply operation from 2.7V to 5.5V
• INL error of ±2LSB
• Operating temperature range from -40°C to 125°C
• EEPROM write time of 25ms
• Supply current of 210µA

Applications

Signal Processing, Portable Devices, Automotive

Warnings Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Other details

Brand	MICROCHIP
Part Number	MCP4725A0T-E/CH
Quantity	Each (Supplied on Cut Tape)
Technical Data Sheet EN
Product Change Notice EN
CAD CadSoft_EAGLE EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.