- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
- +85 to -65° Tilt Range
- 100mm Half Ball
- Spreader Dolly
The Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots. The legs are made from aluminum and feature three leg sections. The head and legs come with a spreader dolly, and the system is height-adjustable from 36 to 73.5". To aid in leveling your shot, a bubble level is incorporated into the head. The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot. The head features discreet pan and tilt locks, and the removable pan handle can be attached to either side of the head by via the built-in rosettes.
- The sliding balance plate features a total of four inches of balance adjustment, two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.
- The head incorporates a small stud at the front that prevents the balance plate from sliding out.
- The included spreader dolly secures your tripod's legs, but allows you to roll your tripod from one point to another on a smooth surface. It can be used during a shot, but it is not as smooth as a true dolly.
| Payload | 35 lb / 16 kg |
| Counterbalance | Fixed |
| Drag Mode | Two-step |
| Tilt Angle | +85° / -65° |
| Camera Plate | Sliding |
| Sliding Range | ±2" / 50 mm |
| Plate Attachment | Two 3/8"-16 screws |
| Spare Screw | 3/8"-16 |
| Section | Two-stage |
| Bubble Level | Non-illuminated |
| Ball Diameter | 100 mm |
| Temperature Range | -4 to 140°F / -20 to +60°C |
| Height | 36.0 to 73.5" / 91.4 to 186.9 cm |
| Weight | 23.3 lb / 10.6 kg |
| Packaging Info |
| Package Weight | 30.0 lb |
| Box Dimensions (LxWxH) | 31.4 x 16.9 x 10.4" |
In the Box
Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
