Kopul DMX5PT-S Overview
- 1 Description
- 2 Terminates DMX Runs
- 3 Integrated 120-Ohm Resistor
- 4 Effective over Long Runs
The DMX5PT-S 5-Pin DMX Terminator from Kopul is designed to plug into the last device in a DMX daisy chain to eliminate bounce-back signal noise that can compromise the operation of your lights. The terminator features a 120-Ohm resistor that absorbs the DMX signal that can accumulate over a long run of devices. It helps prevent disruption of your DMX programming.
Terminates DMX Runs
If your lights or other DMX devices are not operating correctly, plug the DMX5PT-S into the 5-pin DMX-out jack of the last device on your chain. It prevents the DMX signal from reflecting backward and eliminates DMX problems during shoots or live events.
Integrated 120-Ohm Resistor
The integrated 120-Ohm resistor absorbs signal reflections, eliminates DMX bounce-back, and provides smooth operation of the gear in your DMX chain.
Effective over Long Runs
As you add more lights to the daisy chain, it's more likely that you'll experience errors in your lighting programming due to bounce-back signal reflections. Especially for runs over 100 feet, plugging the DMX5PT-S into the last device is a fast and easy solution to keep your DMX gear running smoothly.
UPC: 847628018907
Table of Contents
- Description
- Terminates DMX Runs
- Integrated 120-Ohm Resistor
- Effective over Long Runs
Kopul DMX5PT-S Specs
Electrical
Nominal Impedance | 120 Ohms |
General
Connector 1 | 5-Pin XLR Male |
Outer Diameter | 0.8" / 2.03 cm |
Cable Length | 2.75" / 6.99 cm |
Weight | 0.6 oz / 17 g |
Packaging Info
Package Weight | 0.095 lb |
Box Dimensions (LxWxH) | 4.7 x 3.3 x 0.8" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.