Kemet C2220X472KHRACAUTO SMD Multilayer Ceramic Capacitor 4700 pF 3 kV 2220 [5650 Metric] ± 10% X7R

KEMET's Automotive Grade High Voltage Surface Mount MLCCs with Flexible Termination (HV FT-CAP) address the primary failure mode of MLCCs - flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Featuring several of the highest CV (capacitance/voltage) values available in the industry, these devices utilize a pliable and conductive silver epoxy between the base metal and nickel barrier layers of the termination system. The addition of this epoxy layer inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Although flexible termination technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems.

• AEC-Q200 automotive qualified
• Operating temperature range from -55°C to +125°C
• Superior flex performance (up to 5 mm)
• Exceptional performance at high frequencies
• Low ESR and ESL

Warnings Market demand for this product has caused an extension in lead times, delivery dates may fluctuate

Product details

Capacitance	4700pF
Voltage Rating	3kV
Ceramic Capacitor Case	2220 [5650 Metric]
Capacitance Tolerance	± 10%
Dielectric Characteristic	X7R
Product Range	AEC-Q200 X Series FT-CAP
Operating Temperature Min	-55°C
Operating Temperature Max	125°C
Automotive Qualification Standard	AEC-Q200
MSL	MSL 1 - Unlimited
RoHS Phthalates Compliant	Yes

Other details

Brand	KEMET
Part Number	C2220X472KHRACAUTO
Quantity	Each (Supplied on Cut Tape)
Technical Data Sheet EN
Manufacturer Catalogue EN

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.