Inovativ AXIS Command Station with Top Drawer

Mount AXIS vDrop workstation accessories and other grip equipment onto the AXIS Stand from Inovativ. This anodized aluminum grip stand features three sections that extend to a maximum 79" tall, and it collapses down to 50.5" when folded. Its dual-reinforced legs provide a solid base to keep from tipping.

The three-section stand is compatible with the separately available heavy-duty 8" caster wheel system that will allow you to transport the stand smoothly across the floor, features foot brakes, and has a footprint of 37.7 x 46.4". Each stand section is secured with a locking knob and the top section features a Junior pin.

Keep your AXIS Grip stand rolling smooth even over rough ground or electrical cords with the AXIS 8" Wheel Set from Inovativ. The wheel set includes three heavy-duty swivel wheels with footbrakes that mount onto 1" square AXIS grip stand legs.

The wheels are constructed with a durable aluminum and each wheel weighs approximately 6.5 lb. When attached to stand legs, the wheels create a footprint of 37.8 x 46.4". Each wheel is secured to the stand leg with a locking lever, and footbrakes allow you to secure the stand in-place. Each wheel can be stored in its own included nylon bag, and all the hardware required for attaching the wheels to the stand is included.

Use this AXIS Weight Hanger with 25 lb Weight Bag from Inovativ to keep your AXIS grip stand stable. The hanger mounts onto the 1" leg of your AXIS or American grip stand and secures with a locking lever. It provides a place to hang the included 25 lb AXIS weight bag or other type of weighted bag for stability.

Add a platform to your AXIS Stand or workstation with this Case Platform from Inovativ. The platform attaches to your stand or workstation using a vDrop mount and includes two mafer clamps to attach to other workstation models. Lay your hard-shell case on top and secure it with separately available tie-down anchors. The platform features an area beneath for an optional Bottom Drawer that offers a three-digit combination lock to secure your gear.

Compatible with the AXIS Stand, this powder-coated black AXIS Trough from Inovativ offers convenient storage for tools, adapters, batteries, and accessories. It quickly installs between the legs of your AXIS Stand and is secured with locking knobs.

The Trough features durable aluminum construction with a powder-coated finish, and it includes a soft carpet lining to prevent noise and scratching of your gear.

Add a workstation platform to your AXIS Stand or grip stand with this WorkSurface Pro Platform from Inovativ. The platform attaches to any stand or workstation with a 2" diameter using its Inovativ vDrop mount. It features two handles on the sides to raise, lower, or rotate the platform.

The platform can rotate around the stand 360°, and it can be raised to a maximum height of 43" and lowered to a minimum height of 34" while mounted on the stand. The top surface of the WorkSurface Pro is lined with a soft carpet to prevent any scuffing of your gear. It also features a cable management hole to pass cables from your equipment through, such as a keyboard or mouse.

Two mafer clamps are included to mount the platform onto other surfaces and to secure additional accessories. The WorkSurface Pro platform is compatible with the separately available Top Drawer with a three-digit combination lock to secure your gear inside.

Add the AXIS Top Drawer to the Inovativ WorkSurface Pro workstation to add lockable storage to your grip rig. This bottom drawer features rails on the sides that slide into the WorkSurface Pro, creating a drawer beneath the top surface.

The drawer features a lock that can be secured and unlocked with a three-digit code. The interior is lined with a soft carpeting and it has a pass-through hole for cable management.

Mount up to two monitors and numerous other accessories onto a grip cart or stand using this Dual Bar with Two Standard Baby Pins Baby Pins and Two Pro Monitor Mounts from Inovativ. The bar features multiple mounting points to position your monitors or accessories and it comes with two Pro Monitor Mounts and two standard Baby pins for additional mounting options.

The bar features eighteen 3/8"-16 mounting threads to add mounts and accessories such as the two included standard Baby pins, which will offset your monitors from the bar. The two monitor mounts install on the Baby pin plugs and offer 100 x 100 standard VESA plates to mount your monitors. You can also add separately available hooks, Baby pin brackets, or plugs with 1/4"-20 bolts that slide on top of the bar to add additional accessories.

Add the AXIS Bottom Drawer to the Inovativ Case or Digi Platform for the DigiCase Pro or similar systems. This bottom drawer features rails that slide into the Case or Digi Platform to create a drawer on the bottom of the system. The drawer features a lock that can be secured and unlocked with a three-digit code.