EVALISO1H815GTOBO1 is a 2 x 8 channel 1.2A evaluation board with ISO1H812G. The board is designed to show the performance of the ISOFACE® ISO1H815G providing an isolated interface output to drive resistive, capacitive or inductive loads directly. The input can be driven by applying 3.3V/5V CMOS compatible signals to connector K3 or using the on-board DIP switches S1 and S2. The input operates in micro controller mode by using chip select and write signals or in direct control mode by pulling these signals to GND and setting the data input D0 to D7. The output consists of 2 times 8 channel high side switches with 1.2A current rating. The output is protected with a channel selected over-temperature switch (to off).
- VCC input voltage range from 3V to 5.5V
- 4.5A maximum output current limit
- Output clamping voltage range from 47V to 60V
- Active current limitation and over temperature protection
- Common diagnostic feedback for overtemperature and for Vbb undervoltage
Other details
| Brand |
INFINEON |
| Part Number |
EVALISO1H815GTOBO1 |
| Quantity |
Each |
| Technical Data Sheet EN |
 |
| Product Change Notice EN |
|
| User Manual EN |
|
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Image is for illustrative purposes only. Please refer to product description.
