Impact Photo Portrait Studio Kit

B&H has put together a kit using predominantly Impact gear that's a great economical solution for your Photo Portrait Studio needs. The kit includes3 fluorescent fixtures with 40W daylight-balanced lamps, two 6' stands, a 3' backlight stand, 2 white translucent umbrellas, 2 silver-beaded umbrellas and a stand and umbrella case.

Kit Components:

The Single Socket Fluorescent Fixture from Impact is a lightweight fixture in a polycarbonate housing designed to accept Edison-base compact fluorescent lamps. It can be used with up to 105W CFL bulbs. The fixture's bracket tilts and locks into position and features a standard 5/8" receiver that mounts on any 5/8" stud or accessory.

The 3-section 6' Impact Black Light Stand is an economical support with an industry-standard 5/8" stud top with a 1/4"-20 thread. The stand folds down to 26.3" and weighs 1.8 lb.

This 3' black anodized aluminum Impact Back Light Stand consists of a base and riser. Use the lower part as a base to place a mounted light at floor or table level. Add the extension to the base to raise the height of the light to a maximum of 3'.

The 33" Impact Translucent White Umbrella both reflects light and allows it to pass through. Used in the traditional bounce mode, some of the light is reflected onto your subject while the rest is transmitted, increasing the room's ambient light level, adding fill and reducing contrast. Used in "shoot through" mode, the outside of the umbrella is pointed toward the subject with the light source behind it. This allows you to shoot much closer than normal to render a very soft look.

The Impact 33" Beaded Silver Umbrella strikes a good compromise between high output and soft light quality. The black backing prevents light leakage and provides directional control while the beading breaks up the specular quality that standard silver umbrellas have.

The padded nylon Stand and Umbrella Case measures 36 x 9 x 9" and allows you to carry up to 25 lb of gear. It has a webbed double carry handle that is stitched completely around the outside of the case, as well a removable shoulder strap.

• 3 x Impact Single Socket Fluorescent Fixture

  The Single Socket Fluorescent Fixture from Impact is a lightweight fixture in a polycarbonate housing designed to accept Edison-base compact fluorescent lamps. It can be used with up to 105W CFL bulbs. The fixture's bracket tilts and locks into position and features a standard 5/8" receiver that mounts on any 5/8" stud or accessory.

  UPC: 847628563582
• 2 x Impact Light Stand, Black (6')

  This 6' Impact Black Light Stand is one of the most economical light stands available. It has a 5/8" stud top with a 1/4"-20 thread.

  For small light fixtures or boom arms.

  UPC: 847628011953
• Impact Two Section Back Light Stand (3')

  This 3' Impact Back Light Stand consists of a base and riser. Use the lower part as a base to place a mounted light at floor or table level. Add the extension to the base to raise the height of the light to a maximum of 3' (90 cm). It is constructed of black anodized aluminum.

  Quick Set Up

  Sets up easily in the matter of seconds

  Very Stable

  Stable under recommended loads

  5/8" Reversible Stand Mount

  Fitted with a reversible 5/8" top stud, with 1/4"-20 and 3/8" threads

  UPC: 847628011939
• 3 x Eiko Spiral Fluorescent Lamp 40W/120V 5000K E26 Base

  This is the Eiko Spiral Fluorescent 40W/120V 5500K E26 Base Lamp . It fits Photoflex StarliteQL, Westcott Spiderlite, or any other floodlight fixture that can accept a floodlight bulb. It provides 5000° Kelvin (daylight), equivalent in brightness to a 150 watt tungsten bulb.

  Low heat, long life - 10,000 hours

  UPC: 031293054234
• 2 x Impact White Translucent Umbrella (33")

  Umbrellas soften, broaden, and diminish the light output of any flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a lightbox.

  Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.

  This Impact 33" White Translucent Umbrella is suggested for use in head-and-shoulders portraits for one or two persons.

  UPC: 847628013278
• 2 x Impact Beaded Silver Umbrella (33")

  Umbrellas soften, broaden, and diminish the light output of any flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a lightbox.

  Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.

  This Impact 33" Beaded Silver Umbrella is suggested for use in head-and-shoulders portraits for one or two persons.

  UPC: 847628013261
• General Brand Stand & Umbrella Case

  Carry up to 25 lb of lighting gear with this General Brand Stand & Umbrella Case . It measures 36 x 9 x 9" which makes it well suited to transporting light stands and umbrellas and is padded to keep your gear safe. Also, each side has a grab handle that makes carrying the bag easy and it comes with a removable shoulder strap.

  UPC: 847628591264