Ikelite 200DLM/B Underwater Housing with TTL Circuitry for Olympus O-MD E-M1 Mark III

Depth Rating: 200'

Ikelite 5-Pin Sync Connector for Strobe

Built-In TTL Circuitry

Mechanical Controls

You can capture sharp, detailed photos and video at depths as great as 200' beneath the surface, thanks to Ikelite 's 200DLM/B Underwater Housing with TTL Circuitry for your Olympus O-MD E-M1 Mark III mirrorless camera. An Ikelite 5-pin sync bulkhead and integrated TTL circuitry enable the connection of optional, external strobes. Ikelite DS flash units can be used in TTL or manual exposure mode, while third-party strobes will work in manual mode.

Ergonomic mechanical controls, including push buttons, knurled knobs/dials, and levers, afford access to virtually all camera functions. Built for durability, the enclosure is made in the USA from a corrosion-resistant polycarbonate and ABS plastic blend. It is light gray/white on the front, top, sides, and bottom, but clear in the back to allow you to monitor the O-ring seal and maintain your view of the camera's rear controls. An optional aluminum tray with a quick release grip handle or two will afford improved balance and handling while offering a way to attach optional lighting arms.

The housing ships without a required lens port and accepts various interchangeable dome and flat ports for a broad array of zoom, macro, and wide-angle lenses. For full compatibility, see the DLM Type B Port Chart.

Construction Details

• Depth rating of 200'
• Made by hand in the USA from corrosion-resistant polycarbonate and ABS plastic blend
• White/light gray on front, top, sides, and bottom to reflect sunlight and keep the camera cool when shooting on or above the water's surface
• Clear in back to allow you to monitor the O-ring seal and maintain view of the camera's rear controls
• Housing alone has slightly negative buoyancy in fresh water; overall buoyancy varies depending on the choice of lens and port
• Rear seal design prevents accidental twisting or stretching of the O-ring and eliminates the need for a groove that can trap sand, dirt, and debris, thus enabling easier maintenance
• Spare 1/2-20 threaded accessory port on the side of the housing allows for easy installation of optional Vacuum Kit (#47012)
• Front-loading camera-mounting system makes for quick and easy setup
• Mounting plate enables hassle-free access to battery and memory card
• Two double-passivated stainless steel locking latches are virtually unbreakable

Strobe Connection and Operation

• Ikelite bulkhead with hot shoe connection enables reliable electrical triggering of external strobes via sync cords
• TTL capability is available with the optional Ikelite DL3 DS Link TTL Converter and Hotshoe Kit (#46032)
• Exposure compensation in TTL mode is supported using the camera's built-in control

Controls and Handling

• Large, ergonomic, mechanical push buttons, knurled knobs/dials, and levers are easily operable with or without thick gloves
• Controls afford access to all camera functions except for diopter adjustment control, one-touch white balance button, preview button, and mode dial lock
• Shutter lever is highly sensitive and curved and can be elongated with the optional Trigger Extension (#4077.93) to put it well within reach when the quick release handle is attached
• AEL/AFL button is accessible via the lever placed right by your thumb for quick operation
• Anodized video recording start/stop button is bright red for easy identification
• Other controls located in the same configuration as they are on camera, to allow you to take advantage of muscle memory and familiarity you've already developed
• Push buttons have been redesigned to reduce weight and salt buildup
• Rear control symbols are laser-engraved so as not to peel or fade off with time
• Supplied Supereye Viewfinder offers enhanced view of the camera's OVF when seen through the dive mask
• Can be removed quickly and easily to enable attachment of optional Straight Magnified Viewfinder (6890.2) or 45° Magnified Viewfinder Type 3 (#6891.3)
• Camera's large, bright LCD monitor is visible edge-to-edge through the rear of the housing
• Two 1/4"-20 threaded mounts on the bottom permit attachment to an optional aluminum tray with grip handle(s), which supports optional lighting arm(s) for strobe(s) or video light(s)

Lens Port System

• Ships without a required lens port
• Accepts various interchangeable dome and flat ports for a broad array of zoom, wide-angle, and macro lenses
• For full compatibility, see the DLM Port Chart linked above
• Simply press the port on and tighten three thumb screws

UPC: 883711060491

Depth Rating	200' / 60 m
Controls	Provide Access to All Camera Functions Except for Multi-Selector, One Touch White Balance Button, Fn Lever, Preview Button, and Diopter Adjustment Dial
Material of Construction	Body: Polycarbonate and ABS Plastic Blend Back Plate: Acrylic Small Parts: Acetyl
Buoyancy	Slightly Negative in Fresh Water
External Flash Connector	Ikelite 5-pin Bulkhead Connector
Mounting	2 x 1/4"-20 Threaded Holes with 3.0" / 76 mm Spacing for Tray Attachment
Dimensions	7.5 x 5.8 x 5.9" / 19.0 x 14.6 x 14.9 cm
Weight	2.9 lb / 1.3 kg

All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.