| ₹ 146515.0 includes GST and import duties. | |
| B2B customers can avail ₹ 22343.54 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
ikan PT-ELITE-PRO Overview
- 1Description
- 2ikan Elite Pro Universal Large Tablet Teleprompter
- 3ikan ELITE-REMOTE Bluetooth iPad Teleprompter Remote
- 4ikan Rolling Hard Case for PT-Elite-V2/Pro & PT1200 Teleprompters
The ikan Elite Pro Universal Large Tablet Teleprompter with Remote and Rolling Hard Case is the ultimate bundle to turn your large or standard size tablet into a teleprompter for your presentation needs. A 70/30 beamsplitter teleprompter with magnetic hood and mounting accessories, Bluetooth remote control, and hard rolling case equips you with all the supplies you need to transport and setup your gear.
The ikan Elite Pro has all the same features as the Elite V2, but instead of a standard tablet mount, it includes a larger mount supporting the iPad Pro, Surface Pro, and all other tablets ranging from 6 x 9 to 9 x 12" in size. The Elite Pro has a more flexible design than the original Elite prompter, featuring an adjustable/foldable glass frame and quick-release camera platform. The Elite Pro is a 15mm rod-based system, equipped with a raised, quick-release camera platform above the rods, and with a tripod-mount platform underneath the rods.
The range of supported cameras sizes runs from small mirrorless to mid-level camcorder sizes. Successfully tested cameras include the Sony a7S on the small end, Canon C100 in the mid-range, and Panasonic DVX200 on the large end. The Elite Pro uses a scientific-grade 70/30 glass, housed in an adjustable frame with a magnetic hood that provides a 20 ft reading range. The tripod-mount platform underneath the rods has a wide design and features multiple mounting holes, allowing for better stability and balance.
You can use any prompter app compatible with your tablet, including the Elite Prompter App, which is available sold separately at the App Store, Google Play, and other outlets. An Elite Remote Control designed specifically for iPads is also available sold separately (it works only with the Elite app). The Elite V2 ships to you in a custom-cut foam that you can install in any size-compatible hard case.
- 15mm rod-based mobile prompter with large tablet mount for iPad Pro, Surface Pro, etc.
- Works with cameras ranging in size from small mirrorless to large camcorder (such as a7S to DVX200)
- More flexible upgrade to the original Elite prompter
- Raised, quick-release camera platform
- Tripod-mount platform with multiple mounting holes
- Scientific-grade 70/30 glass
- Adjustable/foldable glass frame
- Magnetic hood
- 20 ft reading range
- Apple iPad Pro, and iPad 1st, 2nd, 3rd, 4th Generation
- Apple iPad Air, Air 2
- Microsoft Surface Pro, Pro 2, Pro 3, Pro 4
- Amazon Fire HD 10
- Samsung Galaxy Tab A, Tab E
- Asus Zenpad 10
- Lenovo Tab, Tab 2
- Lenovo Ideapad Miix 300
- Lenovo Thinkpad 10
- Toshiba Encore 2
- Acer Iconia
- And all other tablets ranging from 6 x 9 to 9 x 12"
The ikan ELITE-REMOTE is compatible with dedicated 3rd-party prompting apps that were designed for the iPad in partnership with ikan. The remote connects to these apps over Bluetooth 4.0 and works from up to 20 ft away.
ELITE-REMOTE features 9 rubberized, soundless buttons and a laser pointer. It connects seamlessly with your iPad by three simple steps: 1) turn on the remote, 2) click the "sync" button, 3) and pair with the iPad. A pouch with a zipper is included for comfortable carrying.
- JoeAllenPro Teleprompter Premium App for iPad
- Bombing Brain Teleprompt+ 3 App for iPad
- Horizontal flip
- Chapter reverse
- Fast reverse
- Chapter forward
- Fast forward
- Forward
- Reverse
- Pause/Play
- Virtual Keyboard Show/Hide
Designed specifically for the ikam PT-ELITE-V2, PT-ELITE-PRO, and PT1200 teleprompters, this 950 Rolling Hard Case from ikan protects your teleprompter during storage and transport. The case ships without foam, and is sized to use the packing foam that comes with your teleprompter; the foam slips perfectly into the case. This case has exterior dimensions of 20.6 x 17.1 x 10.2", making it portable and easy to travel with.
It features a telescoping handle and rolling wheels for travel along smooth floors. A press of the red thumb latch releases the handle to extend or retract. The case also has three integrated folding handles with a cushioned grip. These handles fold flat when not in use and provide a secure grip for lifting the case. A built-in purge valve allows the pressure to equalize�useful for airline travel. Metal clad padlock hasps provide a way to help secure the contents of the case from prying eyes and hands.
In the Box
- ikan Elite Pro Universal Large Tablet Teleprompter
- Large Tablet Holder
- Glass Frame
- Magnetic Hood
- 2 x 12" (30.5 cm) 15mm Rods
- D-Ring and Washer
- ikan ELITE-REMOTE Bluetooth iPad Teleprompter Remote
- Carrying Pouch with Zipper
- ikan Rolling Hard Case for PT-Elite-V2/Pro & PT1200 Teleprompters
- Limited 1-Year Warranty
- Large Tablet Holder Extension Mount & D-Ring
- 3 x D-Ring and Washer
- Baseplate Assembly
- Description
- ikan Elite Pro Universal Large Tablet Teleprompter
- ikan ELITE-REMOTE Bluetooth iPad Teleprompter Remote
- ikan Rolling Hard Case for PT-Elite-V2/Pro & PT1200 Teleprompters
ikan Elite Pro Universal Large Tablet Teleprompter Specs
| Reading Range | 20' / 6.1 m |
| Supported Devices | Min Dimensions: 6 x 9" / 15.2 x 22.8 cm Max Dimensions: 9 x 12" / 22.8 x 30.5 cm |
| Material of Construction | Aluminum, Steel |
| Dimensions | 22.0 x 10.5 x 12.0" / 56.0 x 27.0 x 31.0 cm |
| Weight | 6.5 lb / 2.9 kg |
| Package Weight | 9.75 lb |
| Box Dimensions (LxWxH) | 19.6 x 15.3 x 6.9" |
ikan ELITE-REMOTE Bluetooth iPad Teleprompter Remote Specs
| Package Weight | 0.3 lb |
| Box Dimensions (LxWxH) | 6.7 x 3.7 x 2" |
ikan Rolling Hard Case for PT-Elite-V2/Pro & PT1200 Teleprompters Specs
| Dimensions | Exterior: 20.6 x 17.1 x 10.2" / 52.32 x 43.43 x 25.91 cm Interior: 19 x 14.25 x 8" / 48.26 x 36.20 x 20.32 cm |
| Package Weight | 14.5 lb |
| Box Dimensions (LxWxH) | 22 x 17.2 x 10.2" |
ikan PT-ELITE-PRO Reviews
Disappointing & cheaply made
First impressions aren't good. If this was a $400 package, I would figure I got what I paid for. At $950 I expected a lot more, and feel ripped off. 1- Tablet holder is a flimsy piece of plastic with thumb-screw adjusted metal L brackets. This should be a machined aluminum plate with spring-loaded clips to hold the tablet. It is secured to the rods with one thumb screw, which is too long (a washer must be used) and doesn't hold the bracket square. With a teleprompter everything needs to be squared up and lined up. The 'large tablet adapter' is a 2 aluminum spacer which is also secured with 1 additional thumb screw, increasing the mobility of the ipad holder. This should have been done with a cheese plate, or a long channel/extendable aluminum plate, or at the least 2 screws so it doesn't move. So far not good. 2- The riser for the camera IS NOT height adjustable, except for 1/4. This means it is too low for a Canon R6 (with a 70mm lens the bottom 1/4 of the frame is catching the matte box on the back of the hood) and nearly too tall for a Canon R3 with the same lens (it works if you tip the glass up to about 60 degrees) WHY IS THE CAMERA PLATFORM NOT HEIGHT ADJUSTABLE? How is this supposed to fit 'many different camera sizes'? Where are the different height plates for the camera platform? Where do I buy them? ??? 3- This setup uses hex screws with 4 different head sizes, and includes 3 hex keys, so without extra tools you can't remove the camera platform (see above). 2 head sizes should be plenti. This feels like it was thrown together from spare parts after an evening of drinking. I will absolutely look for products from a different brand going forward.
nice size upgrade, heavy and not smooth assembly
I bought this as a size upgrade for an 8inch Auto Que mirror and rig I bought 4 years ago. That was super expensive at the time (just before ipad prompters became the norm for run and gun). Altho expensive - the rail system was top notch and you could easily move the camera back and forth and keep the base on camera for quick set up. I stopped using the Auto Que wired screen and software and used an Ipad Pro - which I had to bring the edges in to fit the smaller screen. Unable to find an auto Que mirror upgrade - I went down this route. Mirror looks great once set up - but the whole piece is heavy and clunky to adjust. Altho it is built on rails - they are encase in this metal housing - so it doesn't have any inter-changeability with other rail components. and it is really just geared towards mirrorless. My C200 will fit - but would only be secured by a 1/4 screw on the multi-level stand, which is awkward to attach to. Sony A7riii works well - but with no XLR inputs - I will now be running the boom wirelessly via a Senheiser transmitter. I would pay more for something more modular/light nut didn't see anything out there geared towards tablets. Luckily I can still use the Auto Que piece as a tripod rig and the mirror can serve as a matte box of sorts.
first Teleprompter - great choice
I was overwhelmed when opening but it was super easy to install and use.
Great teleprompter with only minor mounting limitations
Bottom line, the teleprompter function works exactly like it should, and does a great job. It's a little bulky to transport, but that's the sacrifice for it being well constructed and very stable once assembled. Other competing versions of this style are flimsy and want to fall apart during use. The only complaint I have (and reason for deducting a star) is the included mount. I love the fact that the whole assembly rides on 15mm rods, making it very easy to adjust the camera to glass position. The weak link is the included camera platform is really designed for tiny little mirrorless type cameras, and there's no ready provision for a quick release method. Mounting a 1DX sized DSLR, much less the C500 body on the factory mount does not work. The mount places the camera too high in relation to the glass frame, and causes the lens to sit too high in the frame. My solution to this was to mount the teleprompter frame on my own set of Wooden Camera rods and use the WC baseplate for attachment to the tripod QR. This allows me to quickly remove/change cameras, but also transport the whole thing by the camera rig when moving around sets. The unit requires almost total disassembly to pack into the carrying case anyway, so the so-called portability of the system doesn't really change much. Overall, I nice system that performs well.
Nice product with some caveats
This prompter rig is pretty easy to assemble, well made and lightweight. The tray for an iPad or monitor is easily adjustable, as is everything else. Balancing is not hard as well. Overall, pretty well made and thought out. The one thing I'm not crazy about is the glass quality. It doesn't look to be particularly sharp, which could be an issue for some people when reading the text.
YES!
Was looking for something sturdy and well built! I found it here with this IKAN teleprompter. This will be the second Ikan teleprompter I have bought!
Looks good, Works good
Satisfaction upon opening the box
Good product
Customer service was good. However, the long waiting for the right person to respond to your needs was unacceptable. Pick up at B& H was easy
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
Bulk Discount
| Quantity | Price |
| 2 | ₹ 143584.7 |
| 3-5 | ₹ 142119.55 |
| 5-10 | ₹ 139189.25 |
| 10+ | ₹ 136258.95 |
Bulk discount will be automatically applied during checkout based on quantity.