| ₹ 144265.0 includes GST and import duties. | |
| B2B customers can avail ₹ 22000.41 ITC on this product | |
| 100% Secure Payments | 100% Genuine product | |
| The product is eligible for Free Shipping |
Description
- 500W/s
- Recycling Full Power: 0.7 Sec @ 115VAC
- Seven Stop Flash Variability
- 90 - 265VAC, 50/60Hz
- Integrated 8-Channel Transceiver
- Sequence, Delay and Strobo Modes
- Temperature Controlled Fan Cooling
- 300W Modeling Lamp
- Up to 20 fps at Minimum Power
- Includes Reflector
The ELC Pro HD 500 Flash Head from Elinchrom is evidence of the company's continued commitment to pushing the envelope in monolight design. Elinchrom has packed the ELC Pro HD 500 with professional features we've come to expect from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature-activated fan keeps the head cool and lengthens the life of both the flash tube and modeling lamp. A pre-flash detector lets you integrate your on-camera flash into your studio system.
Power, variable continuously from 7 to 500W/s, can be mimicked by the 300W proportional modeling lamp to preview your effects. Although Elinchrom provides one, you can swap the sync cord with a separately purchased 8-channel transceiver for wireless triggering from your camera. The head has one built-in to receive the signal. Flash modes allow you to address special situations. The Sequential Mode enables triggering up to 20 ELCs in bursts or in a continuous cycle. Delayed Mode offers a choice of first or second curtain syncing while Strobo Mode allows single frame stroboscopic action sequences. Finally, the auto-sensing multi-voltage power supply means that you can use the ELC Pro HD 500 anywhere in the world.
- Features
-
- Built-in EL-Skyport receiver for triggering
- EL-Skyport with 8 frequency channels with 4 groups
- EL-Skyport Speed Sync mode for synchronization up to a 1/320 sec. on enabled SLR cameras
- Intelligent pre-flash detector system to enable the use of ELC units with speedlights
- 8 f-stop range
- Action-freezing flash durations of 1/2,330 @ full power (t0.5) and as short as 1/5,000 sec. at 53W/s
- Stable even at fastest recycling times
- Up to 20 flashes per second
- Consistent color temperature with +/- 150K°
- Power Auto-dump
- Multi-voltage auto-detection: 90-265VAC excluding modeling lamp
- Low 5V sync voltage safe for all digital camera systems
- Intelligent low noise fan spins slower or faster depending on the internal temperature of the unit
- Impact resistant and fire retardant body shell
- Accessory bayonet permits use of the complete range of light modifiers
- The Elinchrom Standard
-
- OLED display for information and clarity
- Dashboard for an enhanced experience
- Precise control
- Flash Modes
-
- Sequence Mode allows you to sequentially trigger up to 20 ELCs, in bursts or as a continuous cycle to utilize the high frame rate of your camera
- Delayed Mode provides the option of first or second curtain sync and everything in-between
- Strobo Mode allows you to take a picture with stroboscopic effects in a single frame
| Maximum Watt/Seconds | 500 |
| Guide Number | 212.6' (64.8 m) @ 3.3' (1.0 m), ISO 100 with 48° reflector |
| Recycle Time | At full power: @ 230VAC Slow: 2.0 sec., Default: 0.75 sec., Fast: 0.6 sec. @ 115VAC Slow: 2.5 sec., Default: 0.9 sec., Fast: 0.7 sec. Maximum flashes per sec at min power: 20 |
| Flash Duration | Min / Max: 1/2,940 / 1/2,330 @ t0.5 At 53W/s: 1/5,000 (3.1 power setting) |
| Flash Variability | 7.0 Stops: 7.0 - 500W/s Power range display: 0.3 - 6.3 |
| Color Temperature | 5,500K |
| User Replaceable Flashtube | Yes, S-Type, Omega plug-in |
| Changeable Reflector | Yes |
| Modeling Light Wattage | 300W |
| Modeling Light Control | Full, Free, Proportional |
| Voltage Stabilization | Yes, +/- 0.1% |
| Flash Ready Indicator | Audible and LED |
| Operating Voltage | 90 - 265VAC, 50/60Hz |
| Sync Voltage | 5.0V |
| Sync Socket | 3.5 mm Jack |
| Umbrella Mount | 7.0 mm Diameter |
| Built-in Slave Cell | Optical/IR Integrated transceiver: 8 frequency channels with 4 Groups with full RX features |
| Circuit Protection | Fuse |
| Power Consumption | @ 230VAC, 50Hz Slow: during charge: 350 Default: during charge: 700 Fast: during charge: 875 @ 115VAC, 60Hz Slow: during charge: 250 Default: during charge: 500 Fast: during charge: 625 |
| Pure Sine Wave Converter | AC/DC, slow charge: 600 with halogen |
| Fan Cooled | Yes, temperature-controlled |
| Auto Dump | Yes |
| Dimensions | 12.4 x 5.5 x 8.2" (31.5 x 14 x 21 cm) With protective cap |
| Weight | 5.18 lb (2.35 kg) |
| Packaging Info | |
|---|---|
| Package Weight | 9.85 lb |
| Box Dimensions (LxWxH) | 18.3 x 9.7 x 8.5" |
- Mains Cable
- Sync Cable
- Modeling Lamp (300W)
- Glass Dome
- Protective Cap
- Reflector (6.3"/90°)
- Limited 2-Year Warranty
Bulk Discount
| Quantity | Price |
| 2 | ₹ 141379.7 |
| 3-5 | ₹ 139937.05 |
| 5-10 | ₹ 137051.75 |
| 10+ | ₹ 134166.45 |
Bulk discount will be automatically applied during checkout based on quantity.