- Matched Pair
- Omnidirectional Pickup
- Flat Frequency Response
The TC20MP from Earthworks is a matched pair of omnidirectional microphones intended for crucial capturing of loud, transient-rich sources such as drums, percussion, amplified instruments, horns, and much more. The omnidirectional capsule exhibits fast response to transient (peak) signals.
The capsule is coupled with a dedicated low output impedance preamplifier resulting in transparent signal reproduction without noise and peak distortion. An impressively wide, flat frequency response and omnidirectional pick up pattern further maximize detail and eliminate noise due to proximity effect. Overall the TC20 is a valued addition to professional and project recording facilities, as well as sound reinforcement rigs.
- Matched Pair
- This stereo set of Earthworks TC20 microphones are perfectly matched in sensitivity and frequency response from the manufacturer. The matched pair is intended for stereo applications such as ambiance, overhead, and piano capturing.
- Ultra Wide Frequency Response
- The TC20 exhibits a frequency response of 10 Hz to 20 kHz resulting in impressively detailed signal reproduction.
- Fast Transient Response
- The prepolarized condenser capsule is capable of capturing signal rich in transient peaks without noise due to distortion.
- High SPL Handling
- The TC20's high SPL provides incredible headroom which further minimizes noise due to peak distortion and excessively loud signals at close proximity.
- Omnidirectional Polar Pattern
- The omnidirectional polar pattern provides rich, consistent detail at the off and direct sections of the capsule.
- Compact Profile
- The TC20 shares similar features to the TC30 and TC25 except a maximum high frequency response at 20 Hz and a much smaller profile.
UPC: 827517102009
In the Box
Earthworks TC20MP Omnidirectional Condenser Microphone (Matched Pair)
- Plastic Storage Box
- 2 x Microphone Clips
- Frequency Response Chart
- Limited 15-Year Warranty
| Polar Pattern | Omnidirectional |
| Frequency Range | 10�Hz to 20�kHz |
| Equivalent Noise Level | 27 dB�A-Weighted |
| Maximum SPL | 150 dB SPL |
| Impedance | 100�ohms |
| Load Impedance | 600�ohms |
| Sensitivity | 10�mV/PA |
| Power Requirements | 48 V |
| Output Connectors | 3-pin XLR |
| Operating Current Consumption | 10�mA |
| General |
| Length | 6.5" (165.10 mm) |
| Diameter | 0.86" (21.84 mm) |
| Weight | 0.35 lb (159 g) |
| Packaging Info |
| Package Weight | 1.45 lb |
| Box Dimensions (LxWxH) | 8.4 x 6.0 x 3.4" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
