- Accurate Reproduction
- Omnidirectional Pickup
The QTC30 from Earthworks is a condenser microphone. The QTC30 is a member of Earthworks Quiet Time-Coherent series and is designed to accurately reproduce quiet audio signals with pristine detail and low noise. The wide dynamic range of strings, choirs, and orchestras are captured and reproduced with uncanny accuracy and detail. The prepolarized omnidirectional capsule exhibits fast response to transient (peak) signals, enabling exceptional SPL handling and minimal distortion.
The omnidirectional capsule is incapable of proximity effect and a wide, flat frequency response of 6Hz to 30 kHz further maximizes detail. Overall the QTC30 is a valued addition in high definition recording and sound reinforcement applications that include choir, orchestra and acoustic music capturing as well as speech and sound design.
- High Definition & Detail
- The Quiet Time-Coherent microphone series from Earthworks are designed to reproduce quiet signals with uncanny accuracy and detail without noise. Perfect for 192 kHz resolution recording.
- Ultra Wide Frequency Response
- The QTC30 exhibits a frequency response of 6 Hz to 30 kHz resulting in impressively detailed signal reproduction.
- Fast Transient Response
- The prepolarized condenser capsule is capable of capturing signal rich in transient peaks without noise due to distortion.
- High SPL Handling
- The QTC30's high SPL provides incredible headroom which further minimizes noise due to peak distortion and excessively loud signals at close proximity.
- Omnidirectional Polar Pattern
- The omnidirectional polar pattern provides rich, consistent detail at the off and direct sections of the capsule.
UPC: 827517108803
In the Box
Earthworks QTC30 Omnidirectional Condenser Microphone (Single Microphone)
- Plastic Storage Box
- Microphone Clip
- Frequency Response Chart
- Limited 15-Year Warranty
| Polar Pattern | Omnidirectional |
| Frequency Range | 6�Hz to 30�kHz |
| Equivalent Noise Level | 22 dB�A-Weighted |
| Maximum SPL | 142 dB SPL |
| Impedance | 100�ohms |
| Load Impedance | 600�ohms |
| Sensitivity | 30�mV/PA |
| Power Requirements | 48 V |
| Output Connectors | 3-pin XLR |
| Operating Current Consumption | 10�mA |
| General |
| Length | 6.5" (165.10 mm) |
| Diameter | 0.86" (21.84 mm) |
| Weight | 0.35 lb (159 g) |
| Packaging Info |
| Package Weight | 1.05 lb |
| Box Dimensions (LxWxH) | 10.3 x 7.1 x 4.4" |
All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
